Re: UDMA

Jon Masters (mastersj@periscope-systems.freeserve.co.uk)
Sun, 19 Sep 1999 17:10:35 +0100

Mark Hahn wrote:
>
> > The Machine has 2 IDE Controllers on the Motherboard. The first
>
> using udma depends on the chipsets, not so much the drives.
> you failed to mention which chipsets your controllers are.
>

PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPC3064AT, ATA DISK drive
hdb: FUJITSU MPD3108AT, ATA DISK drive
hdc: CRW9420, ATAPI CDROM drive
hdd: ASUS CD-S340, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPC3064AT, 6187MB w/256kB Cache, CHS=788/255/63, UDMA
hdb: FUJITSU MPD3108AT, 10300MB w/512kB Cache, CHS=1313/255/63

Here's all the info you'd ever need:

http://www.tekram.com/Hot_Products.asp?Product=P6B40-A4X

> > Some output: (using lastest hdparm rpm from rufus.w3.org)
>
> does that include the hdparm-3.5i patch?

I have hdparm-3.5-5mdk I don't know if it has the patch or not.

-- 
Jonathan C. Masters (jonathan@oxlug.org)  www.brookes.ac.uk/~95227860
"Upon this rock I will build my church and the gates of hell
shall not prevail against it". -- Matthew 16, 17-18


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/