[URGENT ASSISTANCE REQUESTED] production machines dying

Thomas Schenk (tschenk@dejanews.com)
Mon, 24 Nov 1997 14:14:06 -0600 (CST)


I need any assistance I can get on the following problem:

Some of our machines are getting the following error message on the
console and are locking up tight.

Kernel panic: skput : over: nnnnnnnn:nnn
In swapper task - not syncing

I have checked both machines and can find no other error messages as
to why it is crashing. I can't recall the exact value of nnnnnnnnn:nnn.

Here is the machine configuration and .config file used to build the
kernels. If further details will help determine the source of the
problem, please e-mail me directly.

One machine hardware config is as follows:

Dual Pentium Pro 200MHz
256M RAM
Buslogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
5 SEAGATE ST34572W (4 Gig) drives
3COM 3c509 Ethernet Card
3COM 3c905 Boomerang Ethernet Card

The other machine harware config is as follows:

Dual Pentium II 300MHz
512M RAM
Buslogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
1 SEAGATE ST34371W (4 Gig) drives
3COM 3c509 Ethernet Card
3COM 3c905 Boomerang Ethernet Card

Linux kernel .config file for both machines looks like:
#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y

#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_JAVA is not set
CONFIG_KERNEL_ELF=y
CONFIG_M586=y

#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDE_PCMCIA is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_TRITON=y
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_BLK_DEV_RAM=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
# CONFIG_IP_FORWARD is not set
CONFIG_IP_MULTICAST=y
CONFIG_SYN_COOKIES=y
CONFIG_RST_COOKIES=y
CONFIG_IP_FIREWALL=y
CONFIG_IP_FIREWALL_VERBOSE=y
# CONFIG_IP_MASQUERADE is not set
# CONFIG_IP_TRANSPARENT_PROXY is not set
CONFIG_IP_ALWAYS_DEFRAG=y
CONFIG_IP_ACCT=y
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=m

#
# (it is safe to leave these untouched)
#
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
CONFIG_NO_PATH_MTU_DISCOVERY=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y

#
#
#
CONFIG_IPX=m
CONFIG_ATALK=m
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_TAGGED_QUEUEING=y
# CONFIG_OVERRIDE_CMDS is not set
# CONFIG_AIC7XXX_PAGE_ENABLE is not set
CONFIG_AIC7XXX_PROC_STATS=y
CONFIG_AIC7XXX_RESET_DELAY=15
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_DLCI is not set
CONFIG_PLIP=m
CONFIG_PPP=m

#
# CCP compressors for PPP are only built as modules.
#
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=y
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=y
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_NFS_FS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
CONFIG_ISO9660_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set

#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
# CONFIG_PRINTER is not set
# CONFIG_SPECIALIX is not set
# CONFIG_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# Kernel hacking
#
# CONFIG_PROFILE is not set

--
+-----------------------+-------------------------+------------------------+
| Tom Schenk            | Use Linux!              | All opinions expressed |
| tschenk@dejanews.com  |    Friends don't let    | are mine and not those |
| tschenk@theoffice.net |     friends do Windows! | of my employer.        |
+-----------------------+-------------------------+------------------------+