Re: [PATCH 0/6] Add PPE device tree node for Qualcomm IPQ SoC

[Konrad Dybcio]

On 1/10/24 12:20, Luo Jie wrote:
> The PPE(packet process engine) hardware block is supported by Qualcomm
> IPQ platforms, such as IPQ9574 and IPQ5332. The PPE includes the various
> packet processing modules such as the routing and bridging flow engines,
> L2 switch capability, VLAN and tunnels. Also included are integrated
> ethernet MAC and PCS(uniphy), which is used to connect with the external
> PHY devices by PCS.
>
> This patch series enables support for the following DTSI functionality
> for Qualcomm IPQ9574 and IPQ5332 chipsets.
>
> 1. Add PPE (Packet Processing Engine) HW support
>
> 2. Add IPQ9574 RDP433 board support, where the PPE is connected
>     with qca8075 PHY and AQ PHY.
>
> 3. Add IPQ5332 RDP441 board support, where the PPE is connected
>     with qca8386 and SFP
>
> PPE DTS depends on the NSSCC clock driver below, which provides the
> clocks for the PPE driver.
> https://lore.kernel.org/linux-arm-msm/20230825091234.32713-1-quic_devipriy@xxxxxxxxxxx/
> https://lore.kernel.org/linux-arm-msm/20231211-ipq5332-nsscc-v3-0-ad13bef9b137@xxxxxxxxxxx/

None of these describe (or even use) the compatible in the first
patch of this series ("qcom,ipq9574-ppe"). I didn't check the
subsequent ones, as I assume it's the same situtation, so this
is a NAK.

> Lei Wei (2):
>    arm64: dts: qcom: ipq5332: Add RDP441 board device tree
>    arm64: dts: qcom: ipq9574: Add RDP433 board device tree

These two look unrelated?

> Luo Jie (4):
>    arm64: dts: qcom: ipq9574: Add PPE device tree node
>    arm64: dts: qcom: ipq5332: Add PPE device tree node
>    arm64: dts: qcom: ipq5332: Add MDIO device tree
>    arm64: dts: qcom: ipq9574: Add MDIO device tree

Konrad