Re: clock drift with two Promise Ultra133 TX2 (PDC 20269) cards

[Oskar Liljeblad]

On Tuesday, May 03, 2005 at 10:17, Drew Winstel wrote:
> 
> Hmm... that puzzles me, although for no other reason than I'm not familiar 
> with how Maxtor drives report themselves.  Having the BIOS-reported LBA 
> sectors not equal to the OS-reported geometry may not be a problem, but 
> I must defer to the experts on that one.  
> 
> As an FYI just in case, the new libata-based driver will treat your drives 
> as SCSI drives, so you'll see the drives as sda, sdb, and so forth instead of
> hd?.  

Hm, I patched the kernel with 2.6.11-libata-dev1, compiled it with

# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_VIA82CXXX=y   (for the motherboard IDE)
CONFIG_SCSI=y
CONFIG_SCSI_SATA=y
CONFIG_SCSI_PATA_PDC2027X=y

and rebooted. SCSI is initialized and the pata_pdc2027x driver is
loaded, but it doesn't seem to find any devices. Or maybe it doesn't
look for devices at all. I can tell that it's loaded by the existence
of /sys/bus/pci/drivers/pata_pdc2027x (a directory which is empty).

/proc/scsi/scsi is also empty besides the "Attached devices:" line.
During startup the kernel does say "Probing IDE interface ide0"
through "ide5" (finding only devices on ide0). I also tried compiling
pata_pdc2027x as a module, with same result.

What's wrong here?

Regards,

Oskar Liljeblad (oskar@xxxxxxxxxxx)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/