RE: clock drift with two Promise Ultra133 TX2 (PDC 20269) cards

[Drew Winstel]

> geometry     = 30515/255/63, sectors = 490234752, start = 0

>/dev/hde:

> Model=Maxtor 6B250R0, FwRev=BAH41BM0, SerialNo=<...>
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=16384kB, MaxMultSect=16, MultSect=off
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes:  pio0 pio1 pio2 pio3 pio4 
> DMA modes:  mdma0 mdma1 mdma2 
> UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: (null): 

> * signifies the current active mode

Hmm... that puzzles me, although for no other reason than I'm not familiar 
with how Maxtor drives report themselves.  Having the BIOS-reported LBA 
sectors not equal to the OS-reported geometry may not be a problem, but 
I must defer to the experts on that one.  

As an FYI just in case, the new libata-based driver will treat your drives 
as SCSI drives, so you'll see the drives as sda, sdb, and so forth instead of
hd?.  

Good luck!

Drew
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/