Re: 3com 3c905c-txm

From: Andrew Morton (andrewm@uow.edu.au)
Date: Wed May 10 2000 - 07:57:26 EST

Next message: James Manning: "Re: jiffie wraps clean-ups"
Previous message: Deven T. Corzine: "Version numbering proposal (2.5.x.xx)"
Next in thread: Alan Cox: "Re: 3com 3c905c-txm"
Reply: Alan Cox: "Re: 3com 3c905c-txm"
Maybe reply: Willy Tarreau: "Re: 3com 3c905c-txm"
Maybe reply: Donald Becker: "Re: 3com 3c905c-txm"
Maybe reply: David Hinds: "Re: 3com 3c905c-txm"
Maybe reply: Philip Blundell: "Re: 3com 3c905c-txm"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Louis E Garcia wrote:
>
> My system has a 3com Etherlink 10/100Mbps PCI (3C905C-TXM) nic. Would
> the 3c590 driver work for this card? My kernel is 2.2.16pre2. I think I
> remember something about the b and c versions being different and
> requiring another driver, is this true?

The 3c905, 3c905B and 3c905C are somewhat different, but are all
supported by 3c59x.c.

You have two 3com NICs:

>
> 00:0e.0 Ethernet controller: 3Com Corporation: Unknown device 9004 (rev 04)

Support for this NIC was introduced in 2.2.16pre2

>
> 00:0f.0 Ethernet controller: 3Com Corporation: Unknown device 9200 (rev 6c)

This NIC has been supported since 2.2.14 or thereabouts.

-- -akpm-

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/

Next message: James Manning: "Re: jiffie wraps clean-ups"
Previous message: Deven T. Corzine: "Version numbering proposal (2.5.x.xx)"
Next in thread: Alan Cox: "Re: 3com 3c905c-txm"
Reply: Alan Cox: "Re: 3com 3c905c-txm"
Maybe reply: Willy Tarreau: "Re: 3com 3c905c-txm"
Maybe reply: Donald Becker: "Re: 3com 3c905c-txm"
Maybe reply: David Hinds: "Re: 3com 3c905c-txm"
Maybe reply: Philip Blundell: "Re: 3com 3c905c-txm"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:15 EST