Re: IDE and isapnp

Matthias Riese (punk@informatik.uni-bremen.de)
19 Dec 1999 05:30:14 +0100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Mike Frisch: "Re: [Fwd: Dual Celery on BP6]"
Previous message: Paul: "Re: disabling Intel PSN"
In reply to: Alan Cox: "Re: IDE and isapnp"

I use the same setup here (IDE on SB). If I've configured the SB using
isapnp, the setup is stable between reboots until I boot DOS. So:

1. Configure the SB using isapnp.

2. Reboot Linux -> Linux directly. SB IDE should be still visible /
configured.

3. I've noticed my SB uses the ide3's resources for it's (in my box)
third controller, so I have to put "ide2=0x168,0x36e,10 ide3=noprobe"
on the kernel command line

4. Don't boot DOS (or start from 1. again)

Best Regards,
Matthias Riese

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: Mike Frisch: "Re: [Fwd: Dual Celery on BP6]"
Previous message: Paul: "Re: disabling Intel PSN"
In reply to: Alan Cox: "Re: IDE and isapnp"