> > I could see them with 94MHz, far less with 92MHz and none with 75MHz -
> > so now I'm still using 2.2 with 94MHz...
> No, I was running 2.3 with a non-overclocked BP6 running 400MHz Celerons and
> I was getting the messages (66MHz bus speed). I'm currently running 2.2 due
> to some problems I haven't had time to look at yet with the 3c59x driver in
> 2.3; My impression was that either the 2.3 kernel or the new BIOS available
> from ABIT made the mobo lock up quicker; however I don't have anythign
> scientific to back that up. I might be able to look at it a bit more after
> the holidays, however it's difficult to know since if I try to back out to
> the old BIOS, Linux GPFs on boot up.
>
> Perhaps someone should start a linux-bp6 mailing list?
>
I have the new bios(BP6NJ) and have no problems. Kernels 2.2.14pre14 and
2.3.33 both are absolutely stable at 84Hmz. (2x400 Celerons) with
hendriks ide.2.3.33.19991214.patch.bz2 patch. There is an ongoing
problem with the cdrom producing this *error with the patches but it
works fine otherwise. Kernel 2.2.13 with the ide patch also gives the
same error
*
hdc: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error }
hdc: ide_wait_noerr: error=0x04
hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error
}
hdc: set_drive_speed_status: error=0x04
hdc: ATAPI 5X CD-ROM drive, 240kB Cache
*UPDATE* (You guys jinxed me) Just as I was sending this I got this
error.
(Kernel 2.3.33 with ide patch)
*
APIC error interrupt on CPU#0, should never happen.
... APIC ESR0: 00000000
... APIC ESR1: 00000004
... bit 2: APIC Send Accept Error.
APIC error interrupt on CPU#0, should never happen.
... APIC ESR0: 00000004
... APIC ESR1: 00000006
... bit 1: APIC Receive CS Error (hw problem).
... bit 2: APIC Send Accept Error.
APIC error interrupt on CPU#0, should never happen.
... APIC ESR0: 00000002
... APIC ESR1: 00000002
... bit 1: APIC Receive CS Error (hw problem).
Regards,
-- Ted Sikora Jtl Development Group tsikora@powerusersbbs.com http://powerusersbbs.com- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/