Re: [Fwd: Dual Celery on BP6]

Ted Sikora (tsikora@home.com)
Fri, 17 Dec 1999 14:22:12 -0500


Ted Sikora wrote:
>
> Chris Chiappa wrote:
> >
>
> > > I could see them with 94MHz, far less with 92MHz and none with 75MHz -
> > from ABIT made the mobo lock up quicker; however I don't have anythign
> > scientific to back that up. I might be able to look at it a bit more after
> > the holidays, however it's difficult to know since if I try to back out to
> > the old BIOS, Linux GPFs on boot up.
> >
> > Perhaps someone should start a linux-bp6 mailing list?
> >
>
> I have the new bios(BP6NJ) and have no problems. Kernels 2.2.14pre14 and
> 2.3.33 both are absolutely stable at 84Hmz. (2x400 Celerons) with
> hendriks ide.2.3.33.19991214.patch.bz2 patch. There is an ongoing
> problem with the cdrom producing this *error with the patches but it
> works fine otherwise. Kernel 2.2.13 with the ide patch also gives the
> same error
> *
> hdc: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error }
> hdc: ide_wait_noerr: error=0x04
> hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error
> }
> hdc: set_drive_speed_status: error=0x04
> hdc: ATAPI 5X CD-ROM drive, 240kB Cache
>
> *UPDATE* (You guys jinxed me) Just as I was sending this I got this
> error.
> (Kernel 2.3.33 with ide patch)
> *
> APIC error interrupt on CPU#0, should never happen.
> ... APIC ESR0: 00000000
> ... APIC ESR1: 00000004
> ... bit 2: APIC Send Accept Error.
> APIC error interrupt on CPU#0, should never happen.
> ... APIC ESR0: 00000004
> ... APIC ESR1: 00000006
> ... bit 1: APIC Receive CS Error (hw problem).
> ... bit 2: APIC Send Accept Error.
> APIC error interrupt on CPU#0, should never happen.
> ... APIC ESR0: 00000002
> ... APIC ESR1: 00000002
> ... bit 1: APIC Receive CS Error (hw problem).
>

The errors are definitely produced by overclocking! I stepped the cpu
down to 78Mhz and all errors disappeared. The new 100Mhz Celerons also
ran fine
but anything over 100Mhz the errors appeared as I anticipated.

Regards,

--
Ted Sikora
Jtl Development Group 
tsikora@powerusersbbs.com
http://powerusersbbs.com

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/