Help, error messages from DVD drive access in 2.3.24

Bernard Wei (bwei@home.com)
Mon, 01 Nov 1999 02:02:45 -0800


I'm using testing kernel 2.3.24 in reading CDROM on a DVD drive.
The following messages was printed when I issued a "cp /dev/scd0 file.iso"

Please tell me what they mean, thanks.

sr0: CD-ROM error: Info fld=0x4c23f, Current sr0b:00: sns = f0 5
ASC=64 ASCQ= 0
Raw sense data:0xf0 0x00 0x05 0x00 0x04 0xc2 0x3f 0x0a 0x00 0x00 0x00 0x00 0x64 0x00 0x00 0x00 0x00 0x00
command was: 0x03 00 00 00 40 00
sr0: CD-ROM error: Info fld=0x4c23f, Current sr0b:00: sns = f0 5
ASC=64 ASCQ= 0
Raw sense data:0xf0 0x00 0x05 0x00 0x04 0xc2 0x3f 0x0a 0x00 0x00 0x00 0x00 0x64 0x00 0x00 0x00 0x00 0x00
command was: 0x03 00 00 00 40 00
CD-ROM I/O error: dev 0b:00, sector 1247484

I'm running ide-scsi to access a Pioneer 104S DVD drive. Here's
what Linux sees my setup.

Uniform Multi-Platform E-IDE driver Revision: 6.20
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTTA-371010, ATA DISK drive
hdb: FUJITSU MPB3064ATU, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-104S 011, ATAPI CDROM drive
hdd: CREATIVE CD-RW RW4224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTTA-371010, 9641MB w/465kB Cache, CHS=1229/255/63, UDMA(33)
hdb: FUJITSU MPB3064ATU, 6187MB w/0kB Cache, CHS=788/255/63, UDMA(33)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: PIONEER Model: DVD-ROM DVD-104 Rev: 1.14
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: CREATIVE Model: CD-RW RW4224E Rev: 1.36
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI cdroms total.
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.05
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray

I compiled with ide-scsi cdrom support, with udf extension to iso file system.
Much appreciate any info you can give, thanks.

- Bernard Wei -o)
bwei@home.com o) o) /\\
________________________________/\__/\_____>V/__

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/