Paul Fulghum paulkf@microgate.com
Microgate Corporation www.microgate.com
9501 Capital of Texas Hwy
Austin, Texas 78759
(512)-345-7791
From: Maciej W. Rozycki <macro@ds2.pg.gda.pl>
> On Tue, 12 Oct 1999, Eric Dittman wrote:
>
> > With 2.3.21 I keep getting the following messages:
> >
> > Oct 12 10:48:58 narnia kernel: APIC error interrupt on CPU#0, should
never happen.
> > Oct 12 10:48:58 narnia kernel: ... APIC ESR0: 00000004
> > Oct 12 10:48:58 narnia kernel: ... APIC ESR1: 00000002
>
> Your board probably works under marginal conditions. Bits #0 and #1 in
> ESR mean APIC bus transmit/receive checksum errors and bits #2 and #3 mean
> transmit/receive accept errors. All of these usually indicate serious
> problems with hardware.
>
> > I get a whole lot more of these every so often. I didn't see these on
> > earlier versions of 2.3.xx (but I skipped from 2.3.18ac10 to 2.3.21).
>
> Logging of these errors was only introduced in 2.3.20.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/