Multiple detection of tulip cards in 2.3.18ac6

Thomas Molina (tmolina@home.com)
Mon, 20 Sep 1999 00:30:18 -0500 (CDT)

output from dmesg enclosed. Note how the first few messages I'm used to
seeing about eth0 detection seem to be missing, compared to eth1. There
are only two ethernet cards in the system. The first is a "Boomerang"
and the second is a standard tulip clone. I thought this had been
discussed before, but I couldn't find the messages in the kernel
archives.

Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
00:10:4b:b3:8a:92, IRQ 11
8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface.
Enabling bus-master transmits and whole-frame receives.
3c59x.c:v0.99M 9/3/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth1: Digital DC21041 Tulip rev 33 at 0xc480e000, 00:C0:F0:37:22:56, IRQ 11.
eth1: 21041 Media table, default media 0800 (Autosense).
eth1: 21041 media #0, 10baseT.
eth1: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth2: Digital DC21041 Tulip rev 33 at 0xc4810000, 00:C0:F0:37:22:56, IRQ 11.
eth2: 21041 Media table, default media 0800 (Autosense).
eth2: 21041 media #0, 10baseT.
eth2: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth3: Digital DC21041 Tulip rev 33 at 0xc4812000, 00:C0:F0:37:22:56, IRQ 11.
eth3: 21041 Media table, default media 0800 (Autosense).
eth3: 21041 media #0, 10baseT.
eth3: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth4: Digital DC21041 Tulip rev 33 at 0xc4814000, 00:C0:F0:37:22:56, IRQ 11.
eth4: 21041 Media table, default media 0800 (Autosense).
eth4: 21041 media #0, 10baseT.
eth4: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth5: Digital DC21041 Tulip rev 33 at 0xc4816000, 00:C0:F0:37:22:56, IRQ 11.
eth5: 21041 Media table, default media 0800 (Autosense).
eth5: 21041 media #0, 10baseT.
eth5: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth6: Digital DC21041 Tulip rev 33 at 0xc4818000, 00:C0:F0:37:22:56, IRQ 11.
eth6: 21041 Media table, default media 0800 (Autosense).
eth6: 21041 media #0, 10baseT.
eth6: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
eth7: Digital DC21041 Tulip rev 33 at 0xc481a000, 00:C0:F0:37:22:56, IRQ 11.
eth7: 21041 Media table, default media 0800 (Autosense).
eth7: 21041 media #0, 10baseT.
eth7: 21041 media #4, 10baseT-FD.
tulip.c:v0.91m 9/15/99 becker@cesdis.gsfc.nasa.gov
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 72256k swap-space (priority -1)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/