scsi and parport trouble after update

Stanislav Brabec (utx@k332.feld.cvut.cz)
Fri, 27 Aug 1999 22:22:00 +0200


Hallo kernel developers,

after upgrade from 2.3.5 and 2.2.8 to 2.3.14 and 2.3.15 I have found two
troubles:

-- My SCSI AHA1510 (with no BIOS) gives message: no hosts found.
-- Parport (or status readback) doesn't work with PC-parport and HP printer.

Both these functions were fully functional with both old kernels.

I don't know if these problems are independent or its trouble of
sharing some resources.

-- 
Stanislav Brabec

##################################### ###################################### Build own GNU-Linux: you can find on Postavte si GNU-Linux: naleznete na http://www.penguin.cz/~utx/build.html.en http://www.penguin.cz/~utx/build.html ftp://ftp.penguin.cz/pub/users/utx/ ftp://ftp.penguin.cz/pub/users/utx/

kernel args tested (LILO): append = "aha152x=0x340,12,7,1 parport=0x378,7,3" append = "aha152x=0x340,12,7,1" append = "aha152x=0x340,,,"

# # Automatically generated make config: don't edit #

# # Code maturity level options # CONFIG_EXPERIMENTAL=y

# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set CONFIG_M686=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set

# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y

# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y CONFIG_APM_CPU_IDLE=y CONFIG_APM_DISPLAY_BLANK=y CONFIG_APM_POWER_OFF=y CONFIG_APM_IGNORE_MULTIPLE_SUSPEND=y CONFIG_APM_IGNORE_SUSPEND_BOUNCE=y CONFIG_APM_RTC_IS_GMT=y CONFIG_APM_ALLOW_INTS=y

# # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set

# # Plug and Play configuration # CONFIG_PNP=m CONFIG_ISAPNP=m

# # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y

# # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_IDECD_SLOTS is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y # IDEDMA_NEW_DRIVE_LISTINGS is not set IDEDMA_PCI_EXPERIMENTAL=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_AEC6210 is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_CMD646 is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82C586 is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_AUTO=y # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_CPQ_DA is not set

# # Additional Block Devices # CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_RAM=m # CONFIG_BLK_DEV_XD is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_DEV_HD is not set

# # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NETLINK_DEV=y # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_ALIAS is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y

# # (it is safe to leave these untouched) # CONFIG_SKB_LARGE=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set

# # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_BRIDGE is not set # CONFIG_LLC is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set

# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set

# # SCSI support # CONFIG_SCSI=y

# # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y

# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set

# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AHA152X=y # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set

# # Network device support # CONFIG_NETDEVICES=y

# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set

# # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_RADIO is not set

# # Token ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set

# # Wan interfaces # # CONFIG_HOSTESS_SV11 is not set # CONFIG_COSA is not set # CONFIG_SEALEVEL_4021 is not set # CONFIG_DLCI is not set

# # Amateur Radio support # # CONFIG_HAMRADIO is not set

# # IrDA subsystem support # # CONFIG_IRDA is not set

# # ISDN subsystem # # CONFIG_ISDN is not set

# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set

# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set

# # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_MOUSE is not set # CONFIG_QIC02_TAPE is not set # CONFIG_WATCHDOG is not set CONFIG_NVRAM=y CONFIG_RTC=y

# # Video For Linux # # CONFIG_VIDEO_DEV is not set

# # Joystick support # # CONFIG_JOYSTICK is not set # CONFIG_DTLK is not set

# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set

# # USB drivers - not for the faint of heart # # CONFIG_USB is not set

# # Misc devices # # CONFIG_PIIX4_ACPI is not set

# # Filesystems # # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=y # CONFIG_EFS_FS is not set CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set

# # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFSD=y # CONFIG_NFSD_SUN is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set

# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_SMD_DISKLABEL is not set # CONFIG_SGI_DISKLABEL is not set CONFIG_NLS=y

# # Native Language Support # # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_1 is not set CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set

# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # CONFIG_FB is not set

# # Sound # CONFIG_SOUND=m # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set CONFIG_SOUND_OSS=m # CONFIG_SOUND_PAS is not set # CONFIG_SOUND_SB is not set CONFIG_SOUND_ADLIB=m # CONFIG_SOUND_GUS is not set # CONFIG_SOUND_MPU401 is not set # CONFIG_SOUND_PSS is not set CONFIG_SOUND_MSS=m # CONFIG_SOUND_SSCAPE is not set # CONFIG_SOUND_TRIX is not set CONFIG_SOUND_MAD16=m # CONFIG_MAD16_OLDCARD is not set # CONFIG_SOUND_WAVEFRONT is not set # CONFIG_SOUND_CS4232 is not set # CONFIG_SOUND_OPL3SA2 is not set # CONFIG_SOUND_MAUI is not set # CONFIG_SOUND_SGALAXY is not set # CONFIG_SOUND_AD1816 is not set # CONFIG_SOUND_OPL3SA1 is not set # CONFIG_SOUND_SOFTOSS is not set # CONFIG_SOUND_YM3812 is not set # CONFIG_SOUND_VMIDI is not set # CONFIG_SOUND_UART6850 is not set

# # Additional low level sound drivers # # CONFIG_LOWLEVEL_SOUND is not set

# # Kernel hacking # # CONFIG_MAGIC_SYSRQ is not set

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/