On Sun, 27 Dec 1998, Riley Williams wrote:
> Q> Will perform as EIDE compliant under UNIX or Novell Netware.
>
> It also notes on the box that a "SyQuest Provided Parallel Port to
> SCSI Adapter" is included, if that helps...
I bought the 1.5 Gig drive about a year ago and it works fine. I have the
SCSI version. Here is a syslog entry when I mount the drive:
Dec 31 08:43:08 fuel kernel: ncr53c8xx: at PCI bus 1, device 0, function 0
Dec 31 08:43:08 fuel kernel: ncr53c8xx: 53c810a detected
Dec 31 08:43:08 fuel kernel: ncr53c810a-0: rev=0x11, base=0x20100000,
io_port=0x4100, irq=10
Dec 31 08:43:08 fuel kernel: ncr53c810a-0: ID 7, Fast-10, Parity Checking
Dec 31 08:43:08 fuel kernel: ncr53c810a-0: restart (scsi reset).
Dec 31 08:43:08 fuel kernel: scsi0 : ncr53c8xx - revision 2.5f.1
Dec 31 08:43:08 fuel kernel: scsi : 1 host.
Dec 31 08:43:15 fuel kernel: Vendor: SyQuest Model: SyJet-S
Rev: 0095
Dec 31 08:43:15 fuel kernel: Type: Direct-Access
ANSI SCSI revision: 02
Dec 31 08:43:17 fuel kernel: Detected scsi removable disk sda at scsi0,
channel 0, id 4, lun 0
Dec 31 08:43:17 fuel kernel: ncr53c810a-0-<4,0>: FAST-5 SCSI 5.0 MB/s (200
ns, offset 8)
Dec 31 08:43:17 fuel kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 2929800 [1430 MB] [1.4 GB]
Dec 31 08:43:17 fuel kernel: sda: Write Protect is off
Dec 31 08:43:17 fuel kernel: sda: sda1
- brett
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/