Servui Koubouchine wrote:
> > Use
> > http://cesdis.gsfc.nasa.gov/linux/drivers/test/eepro100.c
I just downloaded, compiled and installed this version of the eepro100 driver. Upon
installation, I saw the following from dmesg:
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043d, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043e, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043e, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043b, len 20/20/40
TCPv4 bad check sum 204.21.196.3:0050 to 168.87.157.26:043b, len 20/20/40
I've seen complaints about "bad check sum" messages on l-k but this is the first
time that I've seen them on one of my systems. I re-installed the eepro100.c from
linux 2.1.125, rebuilt and reinstalled the eepro100.o module (ifdown eth0, rmmod
eepro100 and ifup eth0) and these message haven't reappeared.
-Tom
-- Tom Eastep tom.eastep@compaq.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/