Re: aic7xxx testers needed (TIMEOUT!!!) **pre-15 OK **

Sid Boyce (szb50@amdahl.com)
Fri, 02 Oct 1998 16:14:54 +0000

Moved from pre-12 to pre-15 with pre-2.1.124-2 using AH2940-AU, ultra disabled,
with 1.1Gig HD and 230 MB MO drive.
To date all pre-5.1.0 have worked this end.
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 15/0
(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
aic7xxx: Warning - detected auto-termination on controller:
aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 15/0
aic7xxx: Please verify driver detected settings are correct.
aic7xxx: If not, then please properly set the device termination
aic7xxx: in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
aic7xxx: during machine bootup.
aic7xxx: Cables present (Int-50 YES, Ext-50 NO)
(scsi0) Downloading sequencer code... 419 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.0pre15/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi1 : SCSI DEBUG
scsi : 2 hosts.
Vendor: Quantum Model: XP31070W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: FUJITSU Model: M2512A Rev: 1509
Type: Optical Device ANSI SCSI revision: 02
Detected scsi removable disk sdb at scsi0, channel 0, id 2, lun 0
(scsi0:0:2:0) Synchronous at 5.0 Mbyte/sec, offset 8.

Regards

-- 
... Sid Boyce...Amdahl(Europe)...44-121 422 0375 
--------------------------------------------------------------------------
Any opinions expressed above are mine and do not necessarily represent
 the opinions or policies of Amdahl Corporation.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/