I've been having tons of system crashes all of a sudden. The system
always seems to die at 17f238 which is _ei_interrupt. This is with Kernel
1.2.10.
0017e948 T _ei_open
0017eb18 t _ei_start_xmit
0017f068 T _ei_interrupt <--- Crash!
0017f328 t _ei_tx_intr
0017f628 t _ei_receive
Jun 30 12:52:27 hq kernel: eth0: unknown interrupt 0x0
Jun 30 12:52:39 hq kernel: invalid operand: 0000
Jun 30 12:52:39 hq kernel: EIP: 0010:0017f238
Jun 30 12:52:39 hq kernel: EFLAGS: 00010246
Jun 30 12:52:39 hq kernel: eax: 00000000 ebx: 00000000 ecx: 0000000f edx:00000297
Jun 30 12:52:39 hq kernel: esi: 00199558 edi: 00000290 ebp: 00009098 esp:01b8ef8c
Jun 30 12:52:39 hq kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
Jun 30 12:52:39 hq kernel: Process rsmtp (pid: 2832, process nr: 55, stackpage=01b8e000)
Jun 30 12:52:39 hq kernel: Stack: 01b8efbc 00000032 00000032 0003e400 02050297 00000001 00112cfa 0000000f
Jun 30 12:52:39 hq kernel: 01b8efbc 00112b98 0000000f 01b8efbc 60090688 0003e400 00000032 00000032
Jun 30 12:52:39 hq kernel: 00000032 0003e400 00000000 bfff002b 0000002b 6000002b 0000002b ffffffef
Jun 30 12:52:39 hq kernel: Call Trace: 00112cfa 00112b98
Jun 30 12:52:39 hq kernel: Code: f7 c3 bf ff ff ff 74 56 83 3d 60 a5 19 00 00 74 4d b0 22 89
Jun 30 12:52:39 hq kernel: Aiee, killing interrupt handler
Jun 30 12:52:40 hq kernel: eth0: transmit timed out, TX status 0x3, ISR 0x3.
Jun 30 12:52:40 hq kernel: eth0: Possible IRQ conflict on IRQ15?
For the call trace:
00112b3c t _IRQ15_interrupt <----
00112bbc t _fast_IRQ15_interrupt
00112c2c t _bad_IRQ15_interrupt
00112c7c T _get_irq_list
00112cdc T _do_IRQ <----
00112d0c T _do_fast_IRQ
We're running a DX4/100 with 40mb RAM.
eth0: WD80x3 at 0x280, 00 80 48 85 E1 CC assigning address 0xd0000 WD8003-old, IRQ 15, shared memory at 0xd0000-0xd1fff.
wd.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Rocketport device driver module, version 1.06, 21-May-95
Rocketport controller #0 found at 0x180, 1 AIOPs, 8 ports.
We also have a BOCA 2016 in this machine on IRQ 12, io ports 0x100-0x17f.
Interestingly enough, the problems started about the time we installed our
Rocketport board.
I might add that the Rocketport driver _refused to detect the rocketport_
until I turned DIP switches 7 and 8 >>ON<<, which is in direct conflict
with the HW-INSTALL documentation. With them off, it's never detected.
With them on, it detects it without problems.
Any ideas? Help!!!
-Dan
----
------------------------------------------------------------------------------
Dan Hollis | Seiyuu Daisuki! |"Ranko-chan, ii oyome-san
MAGICK.NET System Administrator | Orikasa Ai | ni nareru wa yo" -
http://www.magick.net/ | Yokoyama Chisa | Saotome Nodoka
dhollis@magick.net | ("(^_^)") |
------------------------------------------------------------------------------