[PATCH 10/13] ASoC: ti: davinci-i2s: Make free-running mode optional

From: Bastien Curutchet
Date: Fri Mar 15 2024 - 07:30:14 EST


McBSP has free-running mode where serial clocks continue to run during
emulation halts. This mode is always enabled by the driver.

Disable this free-running mode according to the 'ti,disable-free-run'
device-tree property.

Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
sound/soc/ti/davinci-i2s.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/ti/davinci-i2s.c b/sound/soc/ti/davinci-i2s.c
index 2c19e45b6b54..67307e75f2a8 100644
--- a/sound/soc/ti/davinci-i2s.c
+++ b/sound/soc/ti/davinci-i2s.c
@@ -165,6 +165,7 @@ struct davinci_mcbsp_dev {
int slot_width;

bool sync_err;
+ bool free_run;
};

static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -444,11 +445,13 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,

/* general line settings */
spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ if (dev->free_run)
+ spcr |= DAVINCI_MCBSP_SPCR_FREE;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- spcr |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ spcr |= DAVINCI_MCBSP_SPCR_RINTM(3);
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
} else {
- spcr |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ spcr |= DAVINCI_MCBSP_SPCR_XINTM(3);
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
}

@@ -766,6 +769,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)

dev->base = io_base;

+ dev->free_run = !of_property_read_bool(pdev->dev.of_node, "ti,disable-free-run");
dev->sync_err = of_property_read_bool(pdev->dev.of_node, "ti,enable-sync-err");

/* setup DMA, first TX, then RX */
--
2.43.2