Re: [PATCH 4/5] media: imx335: Fix active area height discrepency

From: Kieran Bingham
Date: Wed Mar 06 2024 - 12:06:13 EST


Quoting Umang Jain (2024-03-06 08:10:37)
> The imx335 reports a recommended pixel area of - 2592x1944.
> The driver supported mode however limits it to height=1940.

Hrm, I think I would convert widths and sizes to decimal as a patch
before this patch so the effect is clearer in this diff.

> Fix the height discrepency by correctly the value of height
> (with updates to vblank and mode registers).
>
> Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx335.c | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index 6ea09933e47b..c00e0c2be3f3 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -246,13 +246,13 @@ static const int imx335_tpg_val[] = {
> };
>
> /* Sensor mode registers */
> -static const struct cci_reg_sequence mode_2592x1940_regs[] = {
> +static const struct cci_reg_sequence mode_2592x1944_regs[] = {
> {IMX335_REG_MODE_SELECT, 0x01},
> {IMX335_REG_MASTER_MODE, 0x00},
> - {IMX335_REG_WINMODE, 0x04},
> - {IMX335_REG_HTRIMMING_START, 0x0180},
> + {IMX335_REG_WINMODE, 0x00},

What's the distinction of the winmode here. What is 0x04 vs 0x00?

Is this something that could be a defined value? Or is that not worth
the effort?

> + {IMX335_REG_HTRIMMING_START, 0x30},

HTRIMMING_START has moved a lot more than I would expect there.
Is there a visual impact of any concern here?

> {IMX335_REG_HNUM, 0x0a20},
> - {IMX335_REG_Y_OUT_SIZE, 0x0794},
> + {IMX335_REG_Y_OUT_SIZE, 0x0798},

This bit looks expected ;-)

> {IMX335_REG_VCROP_POS, 0x00b0},
> {IMX335_REG_VCROP_SIZE, 0x0f58},

0x0f58 = 3928. Does that correspond to anything on the pixel array size?
We're modifying the vertical size, so I'm curious if the 'vcrop' is or
should be impacted?

> {IMX335_REG_OPB_SIZE_V, 0x00},
> @@ -403,14 +403,14 @@ static const u32 imx335_mbus_codes[] = {
> /* Supported sensor mode configurations */
> static const struct imx335_mode supported_mode = {
> .width = 2592,
> - .height = 1940,
> + .height = 1944,
> .hblank = 342,
> - .vblank = 2560,
> - .vblank_min = 2560,
> + .vblank = 2556,
> + .vblank_min = 2556,
> .vblank_max = 133060,
> .reg_list = {
> - .num_of_regs = ARRAY_SIZE(mode_2592x1940_regs),
> - .regs = mode_2592x1940_regs,
> + .num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
> + .regs = mode_2592x1944_regs,
> },
> };
>
> --
> 2.43.0
>