[PATCH 4/5] media: imx335: Fix active area height discrepency

[Umang Jain]

The imx335 reports a recommended pixel area of - 2592x1944.
The driver supported mode however limits it to height=1940.

Fix the height discrepency by correctly the value of height
(with updates to vblank and mode registers).

Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/imx335.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 6ea09933e47b..c00e0c2be3f3 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -246,13 +246,13 @@ static const int imx335_tpg_val[] = {
 };
 
 /* Sensor mode registers */
-static const struct cci_reg_sequence mode_2592x1940_regs[] = {
+static const struct cci_reg_sequence mode_2592x1944_regs[] = {
 	{IMX335_REG_MODE_SELECT, 0x01},
 	{IMX335_REG_MASTER_MODE, 0x00},
-	{IMX335_REG_WINMODE, 0x04},
-	{IMX335_REG_HTRIMMING_START, 0x0180},
+	{IMX335_REG_WINMODE, 0x00},
+	{IMX335_REG_HTRIMMING_START, 0x30},
 	{IMX335_REG_HNUM, 0x0a20},
-	{IMX335_REG_Y_OUT_SIZE, 0x0794},
+	{IMX335_REG_Y_OUT_SIZE, 0x0798},
 	{IMX335_REG_VCROP_POS, 0x00b0},
 	{IMX335_REG_VCROP_SIZE, 0x0f58},
 	{IMX335_REG_OPB_SIZE_V, 0x00},
@@ -403,14 +403,14 @@ static const u32 imx335_mbus_codes[] = {
 /* Supported sensor mode configurations */
 static const struct imx335_mode supported_mode = {
 	.width = 2592,
-	.height = 1940,
+	.height = 1944,
 	.hblank = 342,
-	.vblank = 2560,
-	.vblank_min = 2560,
+	.vblank = 2556,
+	.vblank_min = 2556,
 	.vblank_max = 133060,
 	.reg_list = {
-		.num_of_regs = ARRAY_SIZE(mode_2592x1940_regs),
-		.regs = mode_2592x1940_regs,
+		.num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
+		.regs = mode_2592x1944_regs,
 	},
 };
 
-- 
2.43.0