Re: [PATCH 1/6] scsi: libsas: Add LIBSAS_SHT_BASE

[Jason Yan]

On 2024/3/5 20:24, John Garry wrote:
> There is much duplication in the scsi_host_template structure for the
> drivers which use libsas.
>
> Similar to how a standard template is used in libata with __ATA_BASE_SHT,
> create a standard template in LIBSAS_SHT_BASE.
>
> Don't set a default for max_sectors at SCSI_DEFAULT_MAX_SECTORS, as
> scsi_host_alloc() will default to this value automatically.
>
> Even though some drivers don't set proc_name, it won't make much difference
> to set as DRV_NAME.
>
> Also add LIBSAS_SHT_BASE_NO_SLAVE_INIT for the hisi_sas drivers which have
> custom .slave_alloc and .slave_configure methods.
>
> Signed-off-by: John Garry <john.g.garry@xxxxxxxxxx>
> ---
>   include/scsi/libsas.h | 30 ++++++++++++++++++++++++++++++
>   1 file changed, 30 insertions(+)
>
> diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
> index f5257103fdb6..484cab72e711 100644
> --- a/include/scsi/libsas.h
> +++ b/include/scsi/libsas.h
> @@ -726,4 +726,34 @@ void sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event,
>   void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
>   			   gfp_t gfp_flags);
>   
> +#define __LIBSAS_SHT_BASE						\
> +	.module				= THIS_MODULE,			\
> +	.name				= DRV_NAME,			\
> +	.proc_name			= DRV_NAME,			\
> +	.queuecommand			= sas_queuecommand,		\
> +	.dma_need_drain			= ata_scsi_dma_need_drain,	\
> +	.target_alloc			= sas_target_alloc,		\
> +	.change_queue_depth		= sas_change_queue_depth,	\
> +	.bios_param			= sas_bios_param,		\
> +	.this_id			= -1,				\
> +	.eh_abort_handler		= sas_eh_abort_handler,		\
> +	.eh_device_reset_handler	= sas_eh_device_reset_handler, 	\
> +	.eh_target_reset_handler	= sas_eh_target_reset_handler,	\
> +	.target_destroy			= sas_target_destroy,		\
> +	.ioctl				= sas_ioctl,			\
> +
> +#ifdef CONFIG_COMPAT
> +#define  _LIBSAS_SHT_BASE		__LIBSAS_SHT_BASE		\

Why two blanks after "define"?

> +	.compat_ioctl			= sas_ioctl,
> +#else
> +#define  _LIBSAS_SHT_BASE		__LIBSAS_SHT_BASE

Same as above.

Otherwise looks good to me.

Reviewed-by: Jason Yan <yanaijie@xxxxxxxxxx>