[PATCH 1/6] scsi: libsas: Add LIBSAS_SHT_BASE

From: John Garry
Date: Tue Mar 05 2024 - 07:25:42 EST


There is much duplication in the scsi_host_template structure for the
drivers which use libsas.

Similar to how a standard template is used in libata with __ATA_BASE_SHT,
create a standard template in LIBSAS_SHT_BASE.

Don't set a default for max_sectors at SCSI_DEFAULT_MAX_SECTORS, as
scsi_host_alloc() will default to this value automatically.

Even though some drivers don't set proc_name, it won't make much difference
to set as DRV_NAME.

Also add LIBSAS_SHT_BASE_NO_SLAVE_INIT for the hisi_sas drivers which have
custom .slave_alloc and .slave_configure methods.

Signed-off-by: John Garry <john.g.garry@xxxxxxxxxx>
---
include/scsi/libsas.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index f5257103fdb6..484cab72e711 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -726,4 +726,34 @@ void sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event,
void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
gfp_t gfp_flags);

+#define __LIBSAS_SHT_BASE \
+ .module = THIS_MODULE, \
+ .name = DRV_NAME, \
+ .proc_name = DRV_NAME, \
+ .queuecommand = sas_queuecommand, \
+ .dma_need_drain = ata_scsi_dma_need_drain, \
+ .target_alloc = sas_target_alloc, \
+ .change_queue_depth = sas_change_queue_depth, \
+ .bios_param = sas_bios_param, \
+ .this_id = -1, \
+ .eh_abort_handler = sas_eh_abort_handler, \
+ .eh_device_reset_handler = sas_eh_device_reset_handler, \
+ .eh_target_reset_handler = sas_eh_target_reset_handler, \
+ .target_destroy = sas_target_destroy, \
+ .ioctl = sas_ioctl, \
+
+#ifdef CONFIG_COMPAT
+#define _LIBSAS_SHT_BASE __LIBSAS_SHT_BASE \
+ .compat_ioctl = sas_ioctl,
+#else
+#define _LIBSAS_SHT_BASE __LIBSAS_SHT_BASE
+#endif
+
+#define LIBSAS_SHT_BASE _LIBSAS_SHT_BASE \
+ .slave_configure = sas_slave_configure, \
+ .slave_alloc = sas_slave_alloc, \
+
+#define LIBSAS_SHT_BASE_NO_SLAVE_INIT _LIBSAS_SHT_BASE
+
+
#endif /* _SASLIB_H_ */
--
2.31.1