Re: [PATCH v3 2/3] ARM: dts: microchip: sama7g5: Add flexcom 10 node

From: Conor Dooley
Date: Thu Feb 15 2024 - 12:03:30 EST


On Thu, Feb 15, 2024 at 11:15:23AM +0200, Mihai Sain wrote:
> Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.
>
> Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/microchip/sama7g5.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> index 269e0a3ca269..c030b318985a 100644
> --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> @@ -958,6 +958,30 @@ i2c9: i2c@600 {
> };
> };
>
> + flx10: flexcom@e2820000 {
> + compatible = "atmel,sama5d2-flexcom";

My comment here was ignored:
https://lore.kernel.org/all/20240214-robe-pregnancy-a1b056c9fe14@spud/

> + reg = <0xe2820000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xe2820000 0x800>;
> + status = "disabled";
> +
> + i2c10: i2c@600 {
> + compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
> + atmel,fifo-size = <32>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
> + <&dma0 AT91_XDMAC_DT_PERID(25)>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> + };
> +
> flx11: flexcom@e2824000 {
> compatible = "atmel,sama5d2-flexcom";
> reg = <0xe2824000 0x200>;
> --
> 2.43.0
>

Attachment: signature.asc
Description: PGP signature