Re: [RFC PATCH v1 1/7] dt-bindings: power: reset: add generic PSCR binding trackers

[Oleksij Rempel]

On Fri, Jan 19, 2024 at 11:28:38AM -0600, Rob Herring wrote:
> On Fri, Jan 19, 2024 at 02:25:15PM +0100, Oleksij Rempel wrote:
> > Add binding for Power State Change Reason (PSCR) subsystem
> 
> Why? 
> 
> How is this different from the reboot reason binding?

I was not able to find "reboot reason", you probably refer to "reboot
mode".

Reboot Mode:
 Purpose: Dictates how the system should reboot (e.g., normal, recovery,
   bootloader).
 Usage: Provides instructions for the next boot mode.
 Scenario: Utilized in planned reboots or software-triggered reset scenarios.

PSCR (Power State Change Reasons):
 Purpose: Logs the reason behind a power state change (e.g., voltage drop,
   over-temperature).
 Usage: Used for rapid logging and post-event analysis, potentially informing
   automatic decision-making in subsequent boots.
 Scenario: Critical in abrupt power-down situations where immediate, detailed
   decision-making is not possible.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |