Re: [RFC PATCH v1 1/7] dt-bindings: power: reset: add generic PSCR binding trackers

[Rob Herring]

On Fri, Jan 19, 2024 at 02:25:15PM +0100, Oleksij Rempel wrote:
> Add binding for Power State Change Reason (PSCR) subsystem

Why? 

How is this different from the reboot reason binding?

> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/power/reset/pscr.yaml | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/pscr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/reset/pscr.yaml b/Documentation/devicetree/bindings/power/reset/pscr.yaml
> new file mode 100644
> index 000000000000..1ce973f3473c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/pscr.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/state-change/pscr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Power State Change Reason (PSCR)
> +
> +maintainers:
> +  - Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> +
> +description: Binding for devices responsable to store reasons for power state

responsible

> +  changes such as reboot and power-off. Reasons like unknown, under voltage,
> +  and over temperature are captured for diagnostic or automatic recovery
> +  purposes.
> +
> +properties:
> +  $nodename:
> +    pattern: "^pscr(@.*|-([0-9]|[1-9][0-9]+))?$"

Drop. This could be used in any random device.

> +
> +  pscr-unknown:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Value to indicate an unknown reason for the power state change.

What's an undocumented value? It would be unknown too, so just drop this 
property.

> +
> +  pscr-under-voltage:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Value to indicate an under-voltage condition of a system critical
> +      regulator as the reason for the power state change.
> +
> +  pscr-over-current:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Value to indicate an over-current condition of a system ctitical regulator
> +      as the reason for the power state change.
> +
> +  pscr-regulator-failure:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Value to indicate an unknow, system ctitical regulator related failure
> +      as the reason for the power state change.
> +
> +  pscr-over-temperature:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: |
> +      Value to indicate a system critical over-temperature condition as the
> +      reason for the power state change.
> +
> +additionalProperties: true
> +
> +...
> -- 
> 2.39.2
>