Re: [PATCH net-next v2 2/3] net: gro: parse ipv6 ext headers without frag0 invalidation

From: Eric Dumazet
Date: Tue Jan 02 2024 - 12:34:26 EST


On Tue, Jan 2, 2024 at 2:25 PM Richard Gobert <richardbgobert@xxxxxxxxx> wrote:
>
> The existing code always pulls the IPv6 header and sets the transport
> offset initially. Then optionally again pulls any extension headers in
> ipv6_gso_pull_exthdrs and sets the transport offset again on return from
> that call. skb->data is set at the start of the first extension header
> before calling ipv6_gso_pull_exthdrs, and must disable the frag0
> optimization because that function uses pskb_may_pull/pskb_pull instead of
> skb_gro_ helpers. It sets the GRO offset to the TCP header with
> skb_gro_pull and sets the transport header. Then returns skb->data to its
> position before this block.
>
> This commit introduces a new helper function - ipv6_gro_pull_exthdrs -
> which is used in ipv6_gro_receive to pull ipv6 ext headers instead of
> ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all
> operations use skb_gro_* helpers, and the frag0 fast path can be taken for
> IPv6 packets with ext headers.
>
> Signed-off-by: Richard Gobert <richardbgobert@xxxxxxxxx>
> Reviewed-by: Willem de Bruijn <willemb@xxxxxxxxxx>
> ---
> include/net/ipv6.h | 1 +
> net/ipv6/ip6_offload.c | 51 +++++++++++++++++++++++++++++++++---------
> 2 files changed, 42 insertions(+), 10 deletions(-)
>
> diff --git a/include/net/ipv6.h b/include/net/ipv6.h
> index 78d38dd88aba..217240efa182 100644
> --- a/include/net/ipv6.h
> +++ b/include/net/ipv6.h
> @@ -26,6 +26,7 @@ struct ip_tunnel_info;
> #define SIN6_LEN_RFC2133 24
>
> #define IPV6_MAXPLEN 65535
> +#define IPV6_MIN_EXTHDR_LEN 8

// Hmm see my following comment.

>
> /*
> * NextHeader field of IPv6 header
> diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
> index 0e0b5fed0995..c07111d8f56a 100644
> --- a/net/ipv6/ip6_offload.c
> +++ b/net/ipv6/ip6_offload.c
> @@ -37,6 +37,40 @@
> INDIRECT_CALL_L4(cb, f2, f1, head, skb); \
> })
>
> +static int ipv6_gro_pull_exthdrs(struct sk_buff *skb, int off, int proto)
> +{
> + const struct net_offload *ops = NULL;
> + struct ipv6_opt_hdr *opth;
> +
> + for (;;) {
> + int len;
> +
> + ops = rcu_dereference(inet6_offloads[proto]);
> +
> + if (unlikely(!ops))
> + break;
> +
> + if (!(ops->flags & INET6_PROTO_GSO_EXTHDR))
> + break;
> +
> + opth = skb_gro_header(skb, off + IPV6_MIN_EXTHDR_LEN, off);

I do not see a compelling reason for adding yet another constant here.

I would stick to

opth = skb_gro_header(skb, off + sizeof(*opth), off);

Consistency with similar helpers is desirable.

> + if (unlikely(!opth))
> + break;
> +
> + len = ipv6_optlen(opth);
> +
> + opth = skb_gro_header(skb, off + len, off);

Note this call will take care of precise pull.

> + if (unlikely(!opth))
> + break;
> + proto = opth->nexthdr;
> +
> + off += len;
> + }
> +
> + skb_gro_pull(skb, off - skb_network_offset(skb));
> + return proto;
> +}
> +
> static int ipv6_gso_pull_exthdrs(struct sk_buff *skb, int proto)
> {
> const struct net_offload *ops = NULL;
> @@ -203,28 +237,25 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head,
> goto out;
>
> skb_set_network_header(skb, off);
> - skb_gro_pull(skb, sizeof(*iph));
> - skb_set_transport_header(skb, skb_gro_offset(skb));
>
> - flush += ntohs(iph->payload_len) != skb_gro_len(skb);
> + flush += ntohs(iph->payload_len) != skb->len - hlen;
>
> proto = iph->nexthdr;
> ops = rcu_dereference(inet6_offloads[proto]);
> if (!ops || !ops->callbacks.gro_receive) {
> - pskb_pull(skb, skb_gro_offset(skb));
> - skb_gro_frag0_invalidate(skb);
> - proto = ipv6_gso_pull_exthdrs(skb, proto);
> - skb_gro_pull(skb, -skb_transport_offset(skb));
> - skb_reset_transport_header(skb);
> - __skb_push(skb, skb_gro_offset(skb));
> + proto = ipv6_gro_pull_exthdrs(skb, hlen, proto);
>
> ops = rcu_dereference(inet6_offloads[proto]);
> if (!ops || !ops->callbacks.gro_receive)
> goto out;
>
> - iph = ipv6_hdr(skb);
> + iph = skb_gro_network_header(skb);
> + } else {
> + skb_gro_pull(skb, sizeof(*iph));
> }
>
> + skb_set_transport_header(skb, skb_gro_offset(skb));
> +
> NAPI_GRO_CB(skb)->proto = proto;
>
> flush--;
> --
> 2.36.1
>