[PATCH v4 0/3] irqchip/gic-v3: Enable non-coherent GIC designs probing

[Lorenzo Pieralisi]

This series is v4 of previous series:

v3: https://lore.kernel.org/all/20231006125929.48591-1-lpieralisi@xxxxxxxxxx
v2: https://lore.kernel.org/all/20230906094139.16032-1-lpieralisi@xxxxxxxxxx
v1: https://lore.kernel.org/all/20230905104721.52199-1-lpieralisi@xxxxxxxxxx

v3 -> v4:
	- Dropped patches [1-3], already merged
	- Added Linuxized ACPICA changes accepted upstream
	- Rebased against v6.7-rc3

v2 -> v3:
	- Added ACPICA temporary changes and ACPI changes to implement
	  ECR https://bugzilla.tianocore.org/show_bug.cgi?id=4557
	- ACPI changes are for testing purposes - subject to ECR code
	  first approval

v1 -> v2:
	- Updated DT bindings as per feedback
	- Updated patch[2] to use GIC quirks infrastructure

Original cover letter
---
The GICv3 architecture specifications provide a means for the
system programmer to set the shareability and cacheability
attributes the GIC components (redistributors and ITSes) use
to drive memory transactions.

Albeit the architecture give control over shareability/cacheability
memory transactions attributes (and barriers), it is allowed to
connect the GIC interconnect ports to non-coherent memory ports
on the interconnect, basically tying off shareability/cacheability
"wires" and de-facto making the redistributors and ITSes non-coherent
memory observers.

This series aims at starting a discussion over a possible solution
to this problem, by adding to the GIC device tree bindings the
standard dma-noncoherent property. The GIC driver uses the property
to force the redistributors and ITSes shareability attributes to
non-shareable, which consequently forces the driver to use CMOs
on GIC memory tables.

On ARM DT DMA is default non-coherent, so the GIC driver can't rely
on the generic DT dma-coherent/non-coherent property management layer
(of_dma_is_coherent()) which would default all GIC designs in the field
as non-coherent; it has to rely on ad-hoc dma-noncoherent property handling.

When a consistent approach is agreed upon for DT an equivalent binding will
be put forward for ACPI based systems.

Lorenzo Pieralisi (3):
  ACPICA: MADT: Add GICC online capable bit handling
  ACPICA: MADT: Add new MADT GICC/GICR/ITS non-coherent flags handling
  irqchip/gic-v3: Enable non-coherent redistributors/ITSes ACPI probing

 drivers/acpi/processor_core.c    | 21 +++++++++++++++++++++
 drivers/irqchip/irq-gic-common.h |  8 ++++++++
 drivers/irqchip/irq-gic-v3-its.c |  4 ++++
 drivers/irqchip/irq-gic-v3.c     |  9 +++++++++
 include/acpi/actbl2.h            | 12 ++++++++++--
 include/linux/acpi.h             |  3 +++
 6 files changed, 55 insertions(+), 2 deletions(-)

-- 
2.34.1