Re: [PATCH 0/3] watchdog: sbsa_gwdt: add support for Marvell ac5

[Chris Packham]

On 15/12/23 04:04, Elad Nachman wrote:
> From: Elad Nachman <enachman@xxxxxxxxxxx>
>
> Add support for Marvell ac5/x variant of the ARM
> sbsa global watchdog. This watchdog deviates from
> the standard driver by the following items:
>
> 1. Registers reside in secure register section.
>     hence access is only possible via SMC calls to ATF.
>
> 2. There are couple more registers which reside in
>     other register areas, which needs to be configured
>     in order for the watchdog to properly generate
>     reset through the SOC.
>
>     The new Marvell compatibility string differentiates between
>     the original sbsa mode of operation and the Marvell mode of
>     operation.

I gave this a quick try on our AC5X based board and it worked well with 
both action=0/action=1

> Elad Nachman (3):
>    dt-bindings: watchdog: add Marvell AC5 watchdog
>    arm64: dts: ac5: add watchdog nodes
>    watchdog: sbsa_gwdt: add support for Marvell ac5
>
>   .../bindings/watchdog/arm,sbsa-gwdt.yaml      |  52 +++-
>   arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi |  14 +
>   arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi |   8 +
>   drivers/watchdog/sbsa_gwdt.c                  | 247 ++++++++++++++++--
>   4 files changed, 298 insertions(+), 23 deletions(-)
>