Re: [net-next PATCH v6 3/3] net: phy: add support for PHY package MMD read/write

[Russell King (Oracle)]

On Wed, Dec 13, 2023 at 04:55:08PM +0100, Christian Marangi wrote:
> On Wed, Dec 13, 2023 at 03:47:19PM +0000, Russell King (Oracle) wrote:
> > On Wed, Dec 13, 2023 at 11:57:30AM +0100, Christian Marangi wrote:
> > > Some PHY in PHY package may require to read/write MMD regs to correctly
> > > configure the PHY package.
> > > 
> > > Add support for these additional required function in both lock and no
> > > lock variant.
> > > 
> > > It's assumed that the entire PHY package is either C22 or C45. We use
> > > C22 or C45 way of writing/reading to mmd regs based on the passed phydev
> > > whether it's C22 or C45.
> > > 
> > > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > 
> > I don't recall what has been said in previous postings of this, but
> > introducing new helpers without an example user is normally frowned
> > upon. The lack of cover message for this three patch series also
> > doesn't help (the cover message could explain why there's no users
> > being proposed with this addition of helpers.)
> >
> 
> These are prereq for the qca803x PHY driver and the PHY package series.
> 
> I can move this single patch in those series, but it was suggested to
> move these simple change to a separate patch to lower the patch number
> since they were orthogonal to the PHY package series proposal.

... so adding a cover message (your series in general seem to lack
those) would be a good idea to explain that.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!