Re: [PATCH net-next v11 09/13] net:ethernet:realtek:rtase: Implement pci_driver suspend and resume function

[Heiner Kallweit]

On 15.11.2023 14:34, Justin Lai wrote:
> Implement the pci_driver suspend function to enable the device
> to sleep, and implement the resume function to enable the device
> to resume operation.
>
> Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
> ---
>  .../net/ethernet/realtek/rtase/rtase_main.c   | 64 +++++++++++++++++++
>  1 file changed, 64 insertions(+)
>
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> index 12607663dd72..b7679b74cc8a 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> @@ -2323,12 +2323,76 @@ static void rtase_shutdown(struct pci_dev *pdev)
>  	rtase_reset_interrupt(pdev, tp);
>  }
>
> +#ifdef CONFIG_PM
> +static int rtase_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +
> +	if (!netif_running(dev))
> +		goto out;
> +
> +	netif_stop_queue(dev);
> +	netif_carrier_off(dev);
> +	netif_device_detach(dev);
> +	rtase_hw_reset(dev);
> +
> +out:
> +	pci_save_state(pdev);
> +
> +	return 0;
> +}
> +
> +static int rtase_resume(struct pci_dev *pdev)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +	struct rtase_private *tp = netdev_priv(dev);
> +	int ret;
> +
> +	pci_set_power_state(pdev, PCI_D0);
> +	pci_restore_state(pdev);
> +	pci_enable_wake(pdev, PCI_D0, 0);
> +

IMO this is done by the PCI core already. See other drivers
and PCI core code.

> +	/* restore last modified mac address */
> +	rtase_rar_set(tp, dev->dev_addr);
> +
> +	if (!netif_running(dev))
> +		goto out;
> +
> +	rtase_wait_for_quiescence(dev);
> +
> +	rtase_tx_clear(tp);
> +	rtase_rx_clear(tp);
> +
> +	ret = rtase_init_ring(dev);
> +	if (ret) {
> +		netdev_err(dev, "unable to init ring\n");
> +		rtase_free_desc(tp);
> +		return -ENOMEM;
> +	}
> +
> +	rtase_hw_config(dev);
> +	/* always link, so start to transmit & receive */
> +	rtase_hw_start(dev);
> +
> +	netif_carrier_on(dev);
> +	netif_wake_queue(dev);
> +	netif_device_attach(dev);
> +
> +out:
> +	return 0;
> +}
> +#endif /* CONFIG_PM */
> +
>  static struct pci_driver rtase_pci_driver = {
>  	.name = KBUILD_MODNAME,
>  	.id_table = rtase_pci_tbl,
>  	.probe = rtase_init_one,
>  	.remove = rtase_remove_one,
>  	.shutdown = rtase_shutdown,
> +#ifdef CONFIG_PM
> +	.suspend = rtase_suspend,
> +	.resume = rtase_resume,

Use pm_sleep_ptr and related macros then you don't need the
conditional compiling.

> +#endif
>  };
>
>  module_pci_driver(rtase_pci_driver);