Re: [PATCH v2 2/2] Input: add Himax HX852x(ES) touchscreen driver
From: Jeff LaBundy
Date: Sun Oct 22 2023 - 14:23:47 EST
Hi Stephan,
This looks great, just a few remaining comments.
On Sat, Sep 30, 2023 at 05:32:01PM +0200, Stephan Gerhold wrote:
> From: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
>
> Add a simple driver for the Himax HX852x(ES) touch panel controller,
> with support for multi-touch and capacitive touch keys.
>
> The driver is somewhat based on sample code from Himax. However, that
> code was so extremely confusing that we spent a significant amount of
> time just trying to understand the packet format and register commands.
> In this driver they are described with clean structs and defines rather
> than lots of magic numbers and offset calculations.
>
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
> Co-developed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> MAINTAINERS | 7 +
> drivers/input/touchscreen/Kconfig | 10 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/himax_hx852x.c | 499 +++++++++++++++++++++++++++++++
> 4 files changed, 517 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 90f13281d297..c551c60b0598 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9331,6 +9331,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
> F: drivers/input/touchscreen/himax_hx83112b.c
>
> +HIMAX HX852X TOUCHSCREEN DRIVER
> +M: Stephan Gerhold <stephan@xxxxxxxxxxx>
> +L: linux-input@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml
> +F: drivers/input/touchscreen/himax_hx852x.c
> +
> HIPPI
> M: Jes Sorensen <jes@xxxxxxxxxxxxxxxxxx>
> L: linux-hippi@xxxxxxxxxx
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index e3e2324547b9..8e5667ae5dab 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -427,6 +427,16 @@ config TOUCHSCREEN_HIDEEP
> To compile this driver as a module, choose M here : the
> module will be called hideep_ts.
>
> +config TOUCHSCREEN_HIMAX_HX852X
> + tristate "Himax HX852x(ES) touchscreen"
> + depends on I2C
> + help
> + Say Y here if you have a Himax HX852x(ES) touchscreen.
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called himax_hx852x.
> +
> config TOUCHSCREEN_HYCON_HY46XX
> tristate "Hycon hy46xx touchscreen support"
> depends on I2C
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 62bd24f3ac8e..f42a87faa86c 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
> obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
> obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
> obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
> +obj-$(CONFIG_TOUCHSCREEN_HIMAX_HX852X) += himax_hx852x.o
> obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
> obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
> obj-$(CONFIG_TOUCHSCREEN_ILITEK) += ilitek_ts_i2c.o
> diff --git a/drivers/input/touchscreen/himax_hx852x.c b/drivers/input/touchscreen/himax_hx852x.c
> new file mode 100644
> index 000000000000..98a55be7891d
> --- /dev/null
> +++ b/drivers/input/touchscreen/himax_hx852x.c
> @@ -0,0 +1,499 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Himax HX852x(ES) Touchscreen Driver
> + * Copyright (c) 2020-2023 Stephan Gerhold <stephan@xxxxxxxxxxx>
> + * Copyright (c) 2020 Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
> + *
> + * Based on the Himax Android Driver Sample Code Ver 0.3 for HMX852xES chipset:
> + * Copyright (c) 2014 Himax Corporation.
> + */
> +
> +#include <asm/unaligned.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define HX852X_COORD_SIZE(fingers) ((fingers) * sizeof(struct hx852x_coord))
> +#define HX852X_WIDTH_SIZE(fingers) ALIGN(fingers, 4)
> +#define HX852X_BUF_SIZE(fingers) (HX852X_COORD_SIZE(fingers) + \
> + HX852X_WIDTH_SIZE(fingers) + \
> + sizeof(struct hx852x_touch_info))
> +
> +#define HX852X_MAX_FINGERS 12
> +#define HX852X_MAX_KEY_COUNT 4
> +#define HX852X_MAX_BUF_SIZE HX852X_BUF_SIZE(HX852X_MAX_FINGERS)
> +
> +#define HX852X_TS_SLEEP_IN 0x80
> +#define HX852X_TS_SLEEP_OUT 0x81
> +#define HX852X_TS_SENSE_OFF 0x82
> +#define HX852X_TS_SENSE_ON 0x83
> +#define HX852X_READ_ONE_EVENT 0x85
> +#define HX852X_READ_ALL_EVENTS 0x86
> +#define HX852X_READ_LATEST_EVENT 0x87
> +#define HX852X_CLEAR_EVENT_STACK 0x88
> +
> +#define HX852X_REG_SRAM_SWITCH 0x8c
> +#define HX852X_REG_SRAM_ADDR 0x8b
> +#define HX852X_REG_FLASH_RPLACE 0x5a
> +
> +#define HX852X_SRAM_SWITCH_TEST_MODE 0x14
> +#define HX852X_SRAM_ADDR_CONFIG 0x7000
> +
> +struct hx852x {
> + struct i2c_client *client;
> + struct input_dev *input_dev;
> + struct touchscreen_properties props;
> + struct gpio_desc *reset_gpiod;
> + struct regulator_bulk_data supplies[2];
> + unsigned int max_fingers;
> + unsigned int keycount;
> + unsigned int keycodes[HX852X_MAX_KEY_COUNT];
> +};
> +
> +struct hx852x_config {
> + u8 rx_num;
> + u8 tx_num;
> + u8 max_pt;
> + u8 padding1[3];
> + __be16 x_res;
> + __be16 y_res;
> + u8 padding2[2];
> +} __packed __aligned(4);
> +
> +struct hx852x_coord {
> + __be16 x;
> + __be16 y;
> +} __packed __aligned(4);
> +
> +struct hx852x_touch_info {
> + u8 finger_num;
> + __le16 finger_pressed;
> + u8 padding;
> +} __packed __aligned(4);
> +
> +static int hx852x_i2c_read(struct hx852x *hx, u8 cmd, void *data, u16 len)
> +{
> + struct i2c_client *client = hx->client;
> + int ret;
> +
> + struct i2c_msg msg[] = {
> + {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 1,
> + .buf = &cmd,
> + },
> + {
> + .addr = client->addr,
> + .flags = I2C_M_RD,
> + .len = len,
> + .buf = data,
> + }
Nit: standard practice is to close all array elements with a trailing comma,
even the final element, in order to avoid an extra line in the diff (i.e.
} --> },) if another element is added later. Obviously we wouldn't add more
elements to this array in the future, but it's best to remain consistent.
> + };
> +
> + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
> + if (ret != ARRAY_SIZE(msg)) {
> + dev_err(&client->dev, "failed to read %#x: %d\n", cmd, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int hx852x_power_on(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + int error;
> +
> + error = regulator_bulk_enable(ARRAY_SIZE(hx->supplies), hx->supplies);
> + if (error) {
> + dev_err(dev, "failed to enable regulators: %d\n", error);
> + return error;
> + }
> +
> + gpiod_set_value_cansleep(hx->reset_gpiod, 1);
> + msleep(20);
> + gpiod_set_value_cansleep(hx->reset_gpiod, 0);
> + msleep(20);
> +
> + return 0;
> +}
> +
> +static int hx852x_start(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + int error;
> +
> + error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_OUT);
> + if (error) {
> + dev_err(dev, "failed to send TS_SLEEP_OUT: %d\n", error);
> + return error;
> + }
> + msleep(30);
> +
> + error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_ON);
> + if (error) {
> + dev_err(dev, "failed to send TS_SENSE_ON: %d\n", error);
> + return error;
> + }
> + msleep(20);
> +
> + return 0;
> +}
> +
> +static int hx852x_stop(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + int error;
> +
> + error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_OFF);
> + if (error) {
> + dev_err(dev, "failed to send TS_SENSE_OFF: %d\n", error);
> + return error;
> + }
> + msleep(20);
> +
> + error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_IN);
> + if (error) {
> + dev_err(dev, "failed to send TS_SLEEP_IN: %d\n", error);
> + return error;
> + }
> + msleep(30);
> +
> + return 0;
> +}
> +
> +static int hx852x_power_off(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + int error;
> +
> + error = regulator_bulk_disable(ARRAY_SIZE(hx->supplies), hx->supplies);
> + if (error)
> + dev_err(dev, "failed to disable regulators: %d\n", error);
> + return error;
> +}
> +
> +static int hx852x_read_config(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + struct hx852x_config conf;
> + int x_res, y_res;
> + int error;
> +
> + error = hx852x_power_on(hx);
> + if (error)
> + return error;
> +
> + /* Sensing must be turned on briefly to load the config */
> + error = hx852x_start(hx);
> + if (error)
> + goto err_power_off;
> +
> + error = hx852x_stop(hx);
> + if (error)
> + goto err_power_off;
> +
> + error = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH,
> + HX852X_SRAM_SWITCH_TEST_MODE);
> + if (error)
> + goto err_power_off;
> +
> + error = i2c_smbus_write_word_data(hx->client, HX852X_REG_SRAM_ADDR,
> + HX852X_SRAM_ADDR_CONFIG);
> + if (error)
> + goto err_test_mode;
> +
> + error = hx852x_i2c_read(hx, HX852X_REG_FLASH_RPLACE, &conf, sizeof(conf));
> + if (error)
> + goto err_test_mode;
> +
> + x_res = be16_to_cpu(conf.x_res);
> + y_res = be16_to_cpu(conf.y_res);
> + hx->max_fingers = (conf.max_pt & 0xf0) >> 4;
> + dev_dbg(dev, "x res: %u, y res: %u, max fingers: %u\n",
> + x_res, y_res, hx->max_fingers);
> +
> + if (hx->max_fingers > HX852X_MAX_FINGERS) {
> + dev_err(dev, "max supported fingers: %u, found: %u\n",
> + HX852X_MAX_FINGERS, hx->max_fingers);
> + error = -EINVAL;
> + goto err_test_mode;
> + }
> +
> + if (x_res && y_res) {
> + input_set_abs_params(hx->input_dev, ABS_MT_POSITION_X, 0, x_res - 1, 0, 0);
> + input_set_abs_params(hx->input_dev, ABS_MT_POSITION_Y, 0, y_res - 1, 0, 0);
> + }
> +
> + error = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH, 0);
> + if (error)
> + goto err_power_off;
> +
> + return hx852x_power_off(hx);
> +
> +err_test_mode:
> + i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH, 0);
> +err_power_off:
> + hx852x_power_off(hx);
> + return error;
Your new version is an improvement, but maybe we can remove duplicate
code by introducing some helper variables:
int error, error2 = 0, error3;
/* ... */
err_test_mode:
error2 = i2c_smbus_write_byte_data(...);
err_power_off:
error3 = hx852x_power_off(...);
if (error)
return error;
return error2 ? : error3;
In this case we achieve our goal of attempting to return the device to a
safe state in both passing and failing cases. In the event of multiple
errors, we return the first to occur.
> +}
> +
> +static int hx852x_handle_events(struct hx852x *hx)
> +{
> + /*
> + * The event packets have variable size, depending on the amount of
> + * supported fingers (hx->max_fingers). They are laid out as follows:
> + * - struct hx852x_coord[hx->max_fingers]: Coordinates for each finger
> + * - u8[ALIGN(hx->max_fingers, 4)]: Touch width for each finger
> + * with padding for 32-bit alignment
> + * - struct hx852x_touch_info
> + *
> + * Load everything into a 32-bit aligned buffer so the coordinates
> + * can be assigned directly, without using get_unaligned_*().
> + */
> + u8 buf[HX852X_MAX_BUF_SIZE] __aligned(4);
> + struct hx852x_coord *coord = (struct hx852x_coord *)buf;
> + u8 *width = &buf[HX852X_COORD_SIZE(hx->max_fingers)];
> + struct hx852x_touch_info *info = (struct hx852x_touch_info *)
> + &width[HX852X_WIDTH_SIZE(hx->max_fingers)];
> + unsigned long finger_pressed, key_pressed;
> + unsigned int i, x, y, w;
> + int error;
> +
> + error = hx852x_i2c_read(hx, HX852X_READ_ALL_EVENTS, buf,
> + HX852X_BUF_SIZE(hx->max_fingers));
> + if (error)
> + return error;
> +
> + finger_pressed = get_unaligned_le16(&info->finger_pressed);
> + key_pressed = finger_pressed >> HX852X_MAX_FINGERS;
> +
> + /* All bits are set when no touch is detected */
> + if (info->finger_num == 0xff || !(info->finger_num & 0x0f))
> + finger_pressed = 0;
> + if (key_pressed == 0xf)
> + key_pressed = 0;
> +
> + for_each_set_bit(i, &finger_pressed, hx->max_fingers) {
> + x = be16_to_cpu(coord[i].x);
> + y = be16_to_cpu(coord[i].y);
> + w = width[i];
> +
> + input_mt_slot(hx->input_dev, i);
> + input_mt_report_slot_state(hx->input_dev, MT_TOOL_FINGER, 1);
> + touchscreen_report_pos(hx->input_dev, &hx->props, x, y, true);
> + input_report_abs(hx->input_dev, ABS_MT_TOUCH_MAJOR, w);
> + }
> + input_mt_sync_frame(hx->input_dev);
> +
> + for (i = 0; i < hx->keycount; i++)
> + input_report_key(hx->input_dev, hx->keycodes[i], key_pressed & BIT(i));
> +
> + input_sync(hx->input_dev);
> + return 0;
> +}
> +
> +static irqreturn_t hx852x_interrupt(int irq, void *ptr)
> +{
> + struct hx852x *hx = ptr;
> + int error;
> +
> + error = hx852x_handle_events(hx);
> + if (error) {
> + dev_err_ratelimited(&hx->client->dev, "failed to handle events: %d\n", error);
> + return IRQ_NONE;
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int hx852x_input_open(struct input_dev *dev)
> +{
> + struct hx852x *hx = input_get_drvdata(dev);
> + int error;
> +
> + error = hx852x_power_on(hx);
> + if (error)
> + return error;
> +
> + error = hx852x_start(hx);
> + if (error) {
> + hx852x_power_off(hx);
> + return error;
> + }
> +
> + enable_irq(hx->client->irq);
> + return 0;
> +}
> +
> +static void hx852x_input_close(struct input_dev *dev)
> +{
> + struct hx852x *hx = input_get_drvdata(dev);
> +
> + hx852x_stop(hx);
> + disable_irq(hx->client->irq);
> + hx852x_power_off(hx);
> +}
> +
> +static int hx852x_parse_properties(struct hx852x *hx)
> +{
> + struct device *dev = &hx->client->dev;
> + int error;
> +
> + hx->keycount = device_property_count_u32(dev, "linux,keycodes");
> + if (hx->keycount <= 0) {
> + hx->keycount = 0;
> + return 0;
> + }
With negative return values of device_property_count_u32() squashed in this
way, there is no way to warn the developer that the array is invalid. The
error message associated with device_property_read_u32_array() below is
essentially dead code, because the latter is a wrapper around the former,
and any syntax error that causes one to fail will cause the other to fail.
Since device_property_count_u32() returns -EINVAL in case of a missing array,
we can do the following. Note there is no need to explicitly set hx->keycount
to zero in case no keys are specified, since the hx structure is correctly
allocated using devm_kzalloc().
int count;
count = device_property_count_u32(...);
if (count == -EINVAL) {
return 0;
} else if (count < 0) {
dev_err(...);
return count;
} else if (count > HX852X_MAX_KEY_COUNT) {
dev_err(...);
return -EINVAL;
}
hx->keycount = count;
error = device_property_read_u32_array(...);
if (error)
dev_err(...);
return error;
> +
> + if (hx->keycount > HX852X_MAX_KEY_COUNT) {
> + dev_err(dev, "max supported keys: %u, found: %u\n",
> + HX852X_MAX_KEY_COUNT, hx->keycount);
> + return -EINVAL;
> + }
> +
> + error = device_property_read_u32_array(dev, "linux,keycodes",
> + hx->keycodes, hx->keycount);
> + if (error)
> + dev_err(dev, "failed to read linux,keycodes: %d\n", error);
> +
> + return error;
> +}
> +
> +static int hx852x_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct hx852x *hx;
> + int error, i;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
> + I2C_FUNC_SMBUS_WRITE_BYTE |
> + I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
> + I2C_FUNC_SMBUS_WRITE_WORD_DATA)) {
> + dev_err(dev, "not all required i2c functionality supported\n");
> + return -ENXIO;
> + }
> +
> + hx = devm_kzalloc(dev, sizeof(*hx), GFP_KERNEL);
> + if (!hx)
> + return -ENOMEM;
> +
> + hx->client = client;
> + hx->input_dev = devm_input_allocate_device(dev);
> + if (!hx->input_dev)
> + return -ENOMEM;
> +
> + hx->input_dev->name = "Himax HX852x";
> + hx->input_dev->id.bustype = BUS_I2C;
> + hx->input_dev->open = hx852x_input_open;
> + hx->input_dev->close = hx852x_input_close;
> +
> + i2c_set_clientdata(client, hx);
> + input_set_drvdata(hx->input_dev, hx);
> +
> + hx->supplies[0].supply = "vcca";
> + hx->supplies[1].supply = "vccd";
> + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(hx->supplies), hx->supplies);
> + if (error)
> + return dev_err_probe(dev, error, "failed to get regulators\n");
> +
> + hx->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(hx->reset_gpiod))
> + return dev_err_probe(dev, PTR_ERR(hx->reset_gpiod),
> + "failed to get reset gpio\n");
> +
> + error = devm_request_threaded_irq(dev, client->irq, NULL, hx852x_interrupt,
> + IRQF_ONESHOT | IRQF_NO_AUTOEN, NULL, hx);
> + if (error)
> + return dev_err_probe(dev, error, "failed to request irq %d", client->irq);
> +
> + error = hx852x_read_config(hx);
> + if (error)
> + return error;
> +
> + input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_X);
> + input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_Y);
> + input_set_abs_params(hx->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> +
> + touchscreen_parse_properties(hx->input_dev, true, &hx->props);
> + error = hx852x_parse_properties(hx);
> + if (error)
> + return error;
> +
> + hx->input_dev->keycode = hx->keycodes;
> + hx->input_dev->keycodemax = hx->keycount;
> + hx->input_dev->keycodesize = sizeof(hx->keycodes[0]);
> + for (i = 0; i < hx->keycount; i++)
> + input_set_capability(hx->input_dev, EV_KEY, hx->keycodes[i]);
> +
> + error = input_mt_init_slots(hx->input_dev, hx->max_fingers,
> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
> + if (error)
> + return dev_err_probe(dev, error, "failed to init MT slots\n");
> +
> + error = input_register_device(hx->input_dev);
> + if (error)
> + return dev_err_probe(dev, error, "failed to register input device\n");
> +
> + return 0;
> +}
> +
> +static int hx852x_suspend(struct device *dev)
> +{
> + struct hx852x *hx = dev_get_drvdata(dev);
int error = 0;
> +
> + mutex_lock(&hx->input_dev->mutex);
> + if (input_device_enabled(hx->input_dev))
> + hx852x_stop(hx);
error = hx852x_stop(...);
> + mutex_unlock(&hx->input_dev->mutex);
> +
> + return 0;
return error;
> +}
> +
> +static int hx852x_resume(struct device *dev)
> +{
> + struct hx852x *hx = dev_get_drvdata(dev);
> + int error = 0;
> +
> + mutex_lock(&hx->input_dev->mutex);
> + if (input_device_enabled(hx->input_dev))
> + error = hx852x_start(hx);
> + mutex_unlock(&hx->input_dev->mutex);
> +
> + return error;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(hx852x_pm_ops, hx852x_suspend, hx852x_resume);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id hx852x_of_match[] = {
> + { .compatible = "himax,hx852es" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, hx852x_of_match);
> +#endif
> +
> +static struct i2c_driver hx852x_driver = {
> + .probe = hx852x_probe,
> + .driver = {
> + .name = "himax_hx852x",
> + .pm = pm_sleep_ptr(&hx852x_pm_ops),
> + .of_match_table = of_match_ptr(hx852x_of_match),
> + },
> +};
> +module_i2c_driver(hx852x_driver);
> +
> +MODULE_DESCRIPTION("Himax HX852x(ES) Touchscreen Driver");
> +MODULE_AUTHOR("Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>");
> +MODULE_AUTHOR("Stephan Gerhold <stephan@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
>
> --
> 2.42.0
>
Kind regards,
Jeff LaBundy