[PATCH net-next 7/7] net: stmmac: Make PTP reference clock references more clear

[Andrew Halaney]

ptp_clock is an overloaded term, and in some instances it is used to
represent the clk_ptp_rate variable. Just use that name as it is
clear that it represents the rate of the PTP reference clock.

Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/hwif.h            |  5 +++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 10 +++++-----
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index bd607da65037..ba92b10cff0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -523,8 +523,9 @@ struct stmmac_ops {
 /* PTP and HW Timer helpers */
 struct stmmac_hwtimestamp {
 	void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data);
-	void (*config_sub_second_increment)(void __iomem *ioaddr, u32 ptp_clock,
-					   int gmac4, u32 *sub_second_inc);
+	void (*config_sub_second_increment)(void __iomem *ioaddr,
+					    u32 clk_ptp_rate,
+					    int gmac4, u32 *sub_second_inc);
 	int (*init_systime) (void __iomem *ioaddr, u32 sec, u32 nsec);
 	int (*config_addend) (void __iomem *ioaddr, u32 addend);
 	int (*adjust_systime) (void __iomem *ioaddr, u32 sec, u32 nsec,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 29fd51bb853d..cc0386ee6dee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -24,7 +24,7 @@ static void config_hw_tstamping(void __iomem *ioaddr, u32 data)
 }
 
 static void config_sub_second_increment(void __iomem *ioaddr,
-		u32 ptp_clock, int gmac4, u32 *sub_second_inc)
+		u32 clk_ptp_rate, int gmac4, u32 *sub_second_inc)
 {
 	u32 value = readl(ioaddr + PTP_TCR);
 	unsigned long data;
@@ -34,14 +34,14 @@ static void config_sub_second_increment(void __iomem *ioaddr,
 	 * increment to twice the number of nanoseconds of a clock cycle.
 	 * The calculation of the default_addend value by the caller will set it
 	 * to mid-range = 2^31 when the remainder of this division is zero,
-	 * which will make the accumulator overflow once every 2 ptp_clock
+	 * which will make the accumulator overflow once every 2 clk_ptp_rate
 	 * cycles, adding twice the number of nanoseconds of a clock cycle :
-	 * 2 * NSEC_PER_SEC / ptp_clock.
+	 * 2 * NSEC_PER_SEC / clk_ptp_rate.
 	 */
 	if (value & PTP_TCR_TSCFUPDT)
-		data = (2 * NSEC_PER_SEC / ptp_clock);
+		data = (2 * NSEC_PER_SEC / clk_ptp_rate);
 	else
-		data = (NSEC_PER_SEC / ptp_clock);
+		data = (NSEC_PER_SEC / clk_ptp_rate);
 
 	/* 0.465ns accuracy */
 	if (!(value & PTP_TCR_TSCTRLSSR))

-- 
2.41.0