Re: [PATCH V5] PCI: qcom: Fixing broken pcie enumeration for 2_3_3 configs ops

[Bjorn Helgaas]

On Mon, Jul 24, 2023 at 12:04:29PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074 2_3_3 post_init.
> PCIe slave addr register offset is 0x358, but was wrongly changed to
> 0x168 as a part of commit 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix
> from register definitions"). Fixing it, by using the right macro and remove
> the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
> 
> Without this access to the registers of slave addr space like iATU etc
> are broken leading to pcie enumeration failure.

This is harder to review than it should be because it mentions
"IPQ8074 2_3_3 post_init" instead of the specific
qcom_pcie_post_init_2_3_3().

Also it says the offset was changed to 0x168, when it was actually
changed to 0x16C.

Also it is not clear that PARF_SLV_ADDR_SPACE_SIZE_2_3_3 is the same
as the "PCIe slave addr register offset" (and this is apparently the
offset of the slave address space *size*, not the offset of the slave
address itself).

Maybe whoever applies this can fix these up.  At the same time,
will you please:

s/Fixing/Fix/ in subject and commit log
s/pcie/PCIe/

> Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
> Cc: <Stable@xxxxxxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  [v5] Fixed subject, commit log
>  [v4] Fix commit sub and added '<mani@xxxxxxxxxx>' reviewed-by tag
>  [v3] Added reviewed-by tag, fixed subject, commit text
>  [v2] Fixed the 'fixes tag' correctly, subject, right macro usage 
> 
>  drivers/pci/controller/dwc/pcie-qcom.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..8418894b3de7 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,6 @@
>  #define PARF_PHY_REFCLK				0x4c
>  #define PARF_CONFIG_BITS			0x50
>  #define PARF_DBI_BASE_ADDR			0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16c /* Register offset specific to IP ver 2.3.3 */
>  #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>  #define PARF_AXI_MSTR_WR_ADDR_HALT		0x178
>  #define PARF_AXI_MSTR_WR_ADDR_HALT_V2		0x1a8
> @@ -810,8 +809,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
>  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	u32 val;
>  
> -	writel(SLV_ADDR_SPACE_SZ,
> -		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
> +	writel(SLV_ADDR_SPACE_SZ, pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
>  
>  	val = readl(pcie->parf + PARF_PHY_CTRL);
>  	val &= ~PHY_TEST_PWR_DOWN;
> -- 
> 2.34.1
>