[PATCH 1/2] dt-bindings: usb: qcom,dwc3: drop assigned-clocks

[Krzysztof Kozlowski]

The binding does not have to specify assigned-clocks, because they are
already allowed by core DT schema.  On the other hand, fixed
assigned-clocks in the binding will not fit different boards or SoCs.
Exactly this is the case for Qualcomm SuperSpeed DWC3 USB SoC controller
binding, where few boards have different assigned-clocks:

  ipq8074-hk10-c1.dtb: usb@8cf8800: assigned-clocks: [[5, 131], [5, 132], [5, 133]] is too long
  sdm660-xiaomi-lavender.dtb: usb@a8f8800: assigned-clocks: [[37, 92], [37, 91], [38, 64]] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 08d42fde466a..7cedd751161d 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -85,15 +85,6 @@ properties:
     minItems: 1
     maxItems: 9
 
-  assigned-clocks:
-    items:
-      - description: Phandle and clock specifier of MOCK_UTMI_CLK.
-      - description: Phandle and clock specifoer of MASTER_CLK.
-
-  assigned-clock-rates:
-    items:
-      - description: Must be 19.2MHz (19200000).
-      - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
   resets:
     maxItems: 1
 
-- 
2.34.1