Re: [PATCH v5 1/2] dt-bindings: net: motorcomm: Add pad driver strength cfg

[Conor Dooley]

On Thu, Jul 20, 2023 at 06:00:15PM +0200, Andrew Lunn wrote:
> > +  motorcomm,rx-clk-drv-microamp:
> > +    description: |
> > +      drive strength of rx_clk rgmii pad.
> > +      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
> > +      be configured with hardware pull-up resistors to match the SOC voltage
> > +      (usually 1.8V).
> > +      The software can read the registers to obtain the LDO voltage and configure
> > +      the legal drive strength(curren).
> > +      =====================================================
> > +      | voltage |        curren Available (uA)            |
> 
> current has a t.
> 
> > +      =====================================================
> > +      | voltage |        curren Available (uA)            |
> 
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

With the fixup,
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature