Re: [RESEND v6 8/8] arm64: dts: qcom: sc7280: Add qcom,adsp-pil-mode property in clock nodes

From: Konrad Dybcio
Date: Fri Jun 16 2023 - 07:36:41 EST


On 16.06.2023 12:35, Mohammad Rafi Shaik wrote:
> From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
>
> Add "qcom,adsp-pil-mode" property in clock nodes for herobrine
> crd revision 3 board specific device tree.
> This is to register clocks conditionally by differentiating ADSP
> based platforms and legacy path platforms.
> Also disable lpass_core clock, as it is creating conflict
> with ADSP clocks and it is not required for ADSP based platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index c02ca393378f..876a29178d46 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -197,6 +197,14 @@ q6prmcc: clock-controller {
> };
> };
>
> +&lpass_aon {
> + qcom,adsp-pil-mode;
That's a whole bunch of hacky bindings that makes no sense..

What should have been done from the beginning is:

- all clocks should be registered inside the clock driver, unconditionally
as far as .c code is concerned

- the regmap properties within should reflect the actual max register
range within the hardware block

- device-tree should contain protected-clocks, which omits registering
specified clks (I guess in the ADSP-less case you could probably even
register all of them and it wouldn't hurt)


> +};
> +
> +&lpass_core {
> + status = "disabled";
status = "reserved";

Konrad
> +};
> +
> &lpass_rx_macro {
> /delete-property/ power-domains;
> /delete-property/ power-domain-names;
> @@ -239,3 +247,7 @@ &lpass_va_macro {
>
> status = "okay";
> };
> +
> +&lpasscc {
> + qcom,adsp-pil-mode;
> +};