Re: [PATCH 25/26] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0

[Konrad Dybcio]

On 12.06.2023 11:23, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index 7754788ea775..dbd9553aa5c7 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -370,6 +370,22 @@ &spi16 {
>  };
>  
>  &tlmm {
> +	ethernet0_default: ethernet0-default-state {
> +		ethernet0_mdc: ethernet0-mdc-pins {
> +			pins = "gpio8";
> +			function = "emac0_mdc";
> +			drive-strength = <16>;
> +			bias-pull-up;
> +		};
> +
> +		ethernet0_mdio: ethernet0-mdio-pins {
> +			pins = "gpio9";
> +			function = "emac0_mdio";
> +			drive-strength = <16>;
> +			bias-pull-up;
> +		};
> +	};
> +
>  	qup_uart10_default: qup-uart10-state {
>  		pins = "gpio46", "gpio47";
>  		function = "qup1_se3";