[PATCH v2 3/3] arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

[Vaishnav Achath]

From: Nishanth Menon <nm@xxxxxx>

fss node claims to be a syscon node, while it actually is a simple bus
where ospi, hbmc peripherals are located and a mux for path select
between OSPI and Hyperbus which can be modelled as a reg-mux. So model
it accordingly and use reg-mux to describe the hbmc-mux. Also update
the region size to the correct values as per the TRM.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Vaishnav Achath <vaishnav.a@xxxxxx>
---

V1->V2:
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes to simplify the hbmc-mux modelling.
 * Update commit message to reflect changes.

Depends on:
 https://lore.kernel.org/all/20230424184810.29453-1-afd@xxxxxx/

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index b58a31371bf3..333564ca9c91 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -338,22 +338,23 @@
 		status = "disabled";
 	};
 
-	fss: syscon@47000000 {
-		compatible = "syscon", "simple-mfd";
-		reg = <0x00 0x47000000 0x00 0x100>;
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x47000000 0x0 0x7c>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x2>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4 0x2>; /* HBMC select */
 		};
 
 		hbmc: hyperbus@47034000 {
 			compatible = "ti,am654-hbmc";
-			reg = <0x00 0x47034000 0x00 0x100>,
+			reg = <0x00 0x47034000 0x00 0x0c>,
 				<0x05 0x00000000 0x01 0x0000000>;
 			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 			clocks = <&k3_clks 102 0>;
-- 
2.17.1