[PATCH 3/3] ARM: dts: exynos: move MIPI phy to PMU node in Exynos4

[Krzysztof Kozlowski]

The MIPI phy is actually part of the Power Management Unit system
controller.  It does not have its own address space, thus keeping the
node under soc causes warnings:

  xynos4412-i9305.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'],
    '#phy-cells': [[1]], 'syscon': [[11]], 'phandle': [[13]]} should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/exynos4.dtsi    | 13 ++++++-------
 arch/arm/boot/dts/exynos4412.dtsi |  2 +-
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 44dcb1377475..8dd6976ab0a7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -105,12 +105,6 @@ memory-controller@12570000 {
 			reg = <0x12570000 0x14>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10023c40 0x20>;
@@ -181,11 +175,16 @@ sys_reg: syscon@10010000 {
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4210-pmu", "syscon";
+			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		dsi_0: dsi@11c80000 {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 11f9dd94b6b3..7fa3e5fd6801 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -798,7 +798,7 @@ &pmu {
 };
 
 &pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
+	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
 	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-- 
2.34.1