[PATCH 2/3] ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250

[Krzysztof Kozlowski]

The MIPI phy is actually part of the Power Management Unit system
controller.  It does not have its own address space, thus keeping the
node under soc causes warnings:

  exynos3250-artik5-eval.dtb: soc: video-phy: {'compatible': ['samsung,s5pv210-mipi-video-phy'],
    '#phy-cells': [[1]], 'syscon': [[15]], 'phandle': [[23]]} should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/exynos3250.dtsi | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 28bb2ce8ccf7..cb2c59c98c4a 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -346,7 +346,7 @@ sys_reg: syscon@10010000 {
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
+			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -354,12 +354,11 @@ pmu_system_controller: system-controller@10020000 {
 			clock-names = "clkout8";
 			clocks = <&cmu CLK_FIN_PLL>;
 			#clock-cells = <1>;
-		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		pd_cam: power-domain@10023c00 {
-- 
2.34.1