Re: [PATCH v2 1/5] brcmfmac: Drop all the RAW device IDs

[Hector Martin]

On 31/01/2023 23.17, Jonas Gorski wrote:
> On Tue, 31 Jan 2023 at 12:36, Hector Martin <marcan@xxxxxxxxx> wrote:
>>
>> These device IDs are only supposed to be visible internally, in devices
>> without a proper OTP. They should never be seen in devices in the wild,
>> so drop them to avoid confusion.
> 
> I think these can still show up in embedded platforms where the
> OTP/SPROM is provided on-flash.
> 
> E.g. https://forum.archive.openwrt.org/viewtopic.php?id=55367&p=4
> shows this bootlog on an BCM4709A0 router with two BCM43602 wifis:
> 
> [    3.237132] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000
> [    3.237174] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
> [    3.237199] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
> [    3.237302] pci 0000:01:00.0: supports D1 D2
> ...
> [    3.782384] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000
> [    3.782440] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
> [    3.782474] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
> [    3.782649] pci 0001:03:00.0: supports D1 D2
> 
> 0xaa52 == 43602 (BRCM_PCIE_43602_RAW_DEVICE_ID)
> 
> Rafał can probably provide more info there.
> 
> Regards
> Jonas
> 

Arend, any comments on these platforms?

- Hector