Re: [PATCH V6 10/12] arm64: dts: imx8mn-evk: enable uart1

From: Shawn Guo
Date: Fri Nov 18 2022 - 22:10:56 EST


On Thu, Nov 17, 2022 at 05:54:01PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
>
> Enable uart1 for BT usage
> Configure the clock to source from IMX8MN_SYS_PLL1_80M, because the uart
> could only support max 1.5M buadrate if using OSC_24M as clock source.
>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> index 2439b91e51d8..dfa11927b1d7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> @@ -247,6 +247,15 @@ &spdif1 {
> status = "okay";
> };
>
> +&uart1 { /* BT */
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clk IMX8MN_CLK_UART1>;
> + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
> + fsl,uart-has-rtscts;

uart-has-rtscts

Fixed it up and applied, thanks!

Shawn

> + status = "okay";
> +};
> +
> &uart2 { /* console */
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart2>;
> @@ -444,6 +453,15 @@ MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
> >;
> };
>
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
> + MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
> + MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
> + MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
> + >;
> + };
> +
> pinctrl_uart2: uart2grp {
> fsl,pins = <
> MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
> --
> 2.37.1
>