[PATCH V6 10/12] arm64: dts: imx8mn-evk: enable uart1

From: Peng Fan (OSS)
Date: Thu Nov 17 2022 - 04:54:31 EST


From: Peng Fan <peng.fan@xxxxxxx>

Enable uart1 for BT usage
Configure the clock to source from IMX8MN_SYS_PLL1_80M, because the uart
could only support max 1.5M buadrate if using OSC_24M as clock source.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
Reviewed-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 2439b91e51d8..dfa11927b1d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -247,6 +247,15 @@ &spdif1 {
status = "okay";
};

+&uart1 { /* BT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -444,6 +453,15 @@ MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
>;
};

+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+ MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+ MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
+ MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
--
2.37.1