Re: [RFC PATCH 1/2] dt-bindings: net: h4-bluetooth: add new bindings for hci_h4

[Krzysztof Kozlowski]

On 08/11/2022 06:55, Dominique Martinet wrote:
> Add devicetree binding to support defining a bluetooth device using the h4
> uart protocol
> 

subject: drop second redundant "bindings"

> This was tested with a NXP wireless+BT AW-XM458 module, but might
> benefit others as the H4 protocol seems often used.
> 
> Signed-off-by: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/h4-bluetooth.yaml | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/h4-bluetooth.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/h4-bluetooth.yaml b/Documentation/devicetree/bindings/net/h4-bluetooth.yaml
> new file mode 100644
> index 000000000000..5d11b89ca386
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/h4-bluetooth.yaml

If the schema is for one specific device, then filename matching the
compatible, so nxp,aw-xm458-bt.yaml... but I understand you want to
describe here class of devices using H4 Bluetooth? Won't they need their
own specific properties?


> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/h4-bluetooth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: H4 Bluetooth
> +
> +maintainers:
> +  - Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
> +
> +description:
> +  H4 is a common bluetooth over uart protocol.

Bluetooth
UART

> +  For example, the AW-XM458 is a WiFi + BT module where the WiFi part is
> +  connected over PCI (M.2), while BT is connected over serial speaking
> +  the H4 protocol. Its firmware is sent on the PCI side.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,aw-xm458-bt
> +
> +  max-speed: true
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    uart1 {

uart

> +        pinctrl-names = "default";
> +        pinctrl-0 = <&pinctrl_uart1>;
> +        assigned-clocks = <&clk IMX8MP_CLK_UART1>;
> +        assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;

Drop unrelated properties.

> +        status = "okay";

Drop status.

> +        fsl,dte-mode = <1>;
> +        fsl,uart-has-rtscts;

Are these two related to this hardware?

> +
> +
> +        bluetooth {
> +            compatible = "nxp,aw-xm458-bt";
> +            max-speed = <3000000>;
> +        };
> +    };

Best regards,
Krzysztof