[RFC PATCH 1/2] dt-bindings: net: h4-bluetooth: add new bindings for hci_h4

From: Dominique Martinet
Date: Tue Nov 08 2022 - 01:11:16 EST


Add devicetree binding to support defining a bluetooth device using the h4
uart protocol

This was tested with a NXP wireless+BT AW-XM458 module, but might
benefit others as the H4 protocol seems often used.

Signed-off-by: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/h4-bluetooth.yaml | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/h4-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/h4-bluetooth.yaml b/Documentation/devicetree/bindings/net/h4-bluetooth.yaml
new file mode 100644
index 000000000000..5d11b89ca386
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/h4-bluetooth.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/h4-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: H4 Bluetooth
+
+maintainers:
+ - Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
+
+description:
+ H4 is a common bluetooth over uart protocol.
+ For example, the AW-XM458 is a WiFi + BT module where the WiFi part is
+ connected over PCI (M.2), while BT is connected over serial speaking
+ the H4 protocol. Its firmware is sent on the PCI side.
+
+properties:
+ compatible:
+ enum:
+ - nxp,aw-xm458-bt
+
+ max-speed: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/imx8mp-clock.h>
+
+ uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+ fsl,dte-mode = <1>;
+ fsl,uart-has-rtscts;
+
+
+ bluetooth {
+ compatible = "nxp,aw-xm458-bt";
+ max-speed = <3000000>;
+ };
+ };
--
2.35.1