Re: [PATCH v1 04/14] mtd: spi-nor: move all xilinx specifics into xilinx.c

From: Tudor.Ambarus
Date: Wed Feb 09 2022 - 22:04:23 EST

Next message: zhangwensheng (E): "Re: [PATCH -next] block: update io_ticks when io hang"
Previous message: Alim Akhtar: "RE: [PATCH 01/10] ARM: dts: exynos: add missing HDMI supplies on SMDK5250"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2/2/22 16:58, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Mechanically move all the xilinx functions to its own module.
>
> Then register the new flash specific ready() function.
>
> Signed-off-by: Michael Walle <michael@xxxxxxxx>

excellent!
Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

> ---
> drivers/mtd/spi-nor/core.c | 64 +------------------------------
> drivers/mtd/spi-nor/core.h | 18 ---------
> drivers/mtd/spi-nor/xilinx.c | 73 ++++++++++++++++++++++++++++++++++++
> include/linux/mtd/spi-nor.h | 9 -----
> 4 files changed, 74 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index c181f2680df2..fdc8ef623254 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -598,57 +598,6 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
> return ret;
> }
>
> -/**
> - * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
> - * @nor: pointer to 'struct spi_nor'.
> - * @sr: pointer to a DMA-able buffer where the value of the
> - * Status Register will be written.
> - *
> - * Return: 0 on success, -errno otherwise.
> - */
> -int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
> -{
> - int ret;
> -
> - if (nor->spimem) {
> - struct spi_mem_op op =
> - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
> - SPI_MEM_OP_NO_ADDR,
> - SPI_MEM_OP_NO_DUMMY,
> - SPI_MEM_OP_DATA_IN(1, sr, 0));
> -
> - spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> -
> - ret = spi_mem_exec_op(nor->spimem, &op);
> - } else {
> - ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
> - 1);
> - }
> -
> - if (ret)
> - dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
> -
> - return ret;
> -}
> -
> -/**
> - * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
> - * the flash is ready for new commands.
> - * @nor: pointer to 'struct spi_nor'.
> - *
> - * Return: 1 if ready, 0 if not ready, -errno on errors.
> - */
> -static int spi_nor_xsr_ready(struct spi_nor *nor)
> -{
> - int ret;
> -
> - ret = spi_nor_xread_sr(nor, nor->bouncebuf);
> - if (ret)
> - return ret;
> -
> - return !!(nor->bouncebuf[0] & XSR_RDY);
> -}
> -
> /**
> * spi_nor_clear_sr() - Clear the Status Register.
> * @nor: pointer to 'struct spi_nor'.
> @@ -798,10 +747,7 @@ static int spi_nor_ready(struct spi_nor *nor)
> if (nor->params->ready)
> return nor->params->ready(nor);
>
> - if (nor->flags & SNOR_F_READY_XSR_RDY)
> - sr = spi_nor_xsr_ready(nor);
> - else
> - sr = spi_nor_sr_ready(nor);
> + sr = spi_nor_sr_ready(nor);
> if (sr < 0)
> return sr;
> fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
> @@ -2677,14 +2623,6 @@ static void spi_nor_init_flags(struct spi_nor *nor)
>
> if (flags & USE_FSR)
> nor->flags |= SNOR_F_USE_FSR;
> -
> - /*
> - * Make sure the XSR_RDY flag is set before calling
> - * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
> - * with Atmel SPI NOR.
> - */
> - if (flags & SPI_NOR_XSR_RDY)
> - nor->flags |= SNOR_F_READY_XSR_RDY;
> }
>
> /**
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 446218b0e017..fabc01ae9a81 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -15,7 +15,6 @@ enum spi_nor_option_flags {
> SNOR_F_USE_FSR = BIT(0),
> SNOR_F_HAS_SR_TB = BIT(1),
> SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
> - SNOR_F_READY_XSR_RDY = BIT(3),
> SNOR_F_USE_CLSR = BIT(4),
> SNOR_F_BROKEN_RESET = BIT(5),
> SNOR_F_4B_OPCODES = BIT(6),
> @@ -351,8 +350,6 @@ struct spi_nor_fixups {
> * SPI_NOR_NO_FR: can't do fastread.
> * USE_CLSR: use CLSR command.
> * USE_FSR: use flag status register
> - * SPI_NOR_XSR_RDY: S3AN flashes have specific opcode to read the
> - * status register.
> *
> * @no_sfdp_flags: flags that indicate support that can be discovered via SFDP.
> * Used when SFDP tables are not defined in the flash. These
> @@ -405,7 +402,6 @@ struct flash_info {
> #define SPI_NOR_NO_FR BIT(8)
> #define USE_CLSR BIT(9)
> #define USE_FSR BIT(10)
> -#define SPI_NOR_XSR_RDY BIT(11)
>
> u8 no_sfdp_flags;
> #define SPI_NOR_SKIP_SFDP BIT(0)
> @@ -462,19 +458,6 @@ struct flash_info {
> .addr_width = (_addr_width), \
> .flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR, \
>
> -#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
> - .id = { \
> - ((_jedec_id) >> 16) & 0xff, \
> - ((_jedec_id) >> 8) & 0xff, \
> - (_jedec_id) & 0xff \
> - }, \
> - .id_len = 3, \
> - .sector_size = (8*_page_size), \
> - .n_sectors = (_n_sectors), \
> - .page_size = _page_size, \
> - .addr_width = 3, \
> - .flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
> -
> #define OTP_INFO(_len, _n_regions, _base, _offset) \
> .otp_org = { \
> .len = (_len), \
> @@ -564,7 +547,6 @@ int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len);
> int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1);
> int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr);
>
> -int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
> ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
> u8 *buf);
> ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
> diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
> index 580562bc1e45..a865dadc2e5d 100644
> --- a/drivers/mtd/spi-nor/xilinx.c
> +++ b/drivers/mtd/spi-nor/xilinx.c
> @@ -8,6 +8,27 @@
>
> #include "core.h"
>
> +#define SPINOR_OP_XSE 0x50 /* Sector erase */
> +#define SPINOR_OP_XPP 0x82 /* Page program */
> +#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
> +
> +#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
> +#define XSR_RDY BIT(7) /* Ready */
> +
> +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
> + .id = { \
> + ((_jedec_id) >> 16) & 0xff, \
> + ((_jedec_id) >> 8) & 0xff, \
> + (_jedec_id) & 0xff \
> + }, \
> + .id_len = 3, \
> + .sector_size = (8*_page_size), \
> + .n_sectors = (_n_sectors), \
> + .page_size = _page_size, \
> + .addr_width = 3, \
> + .flags = SPI_NOR_NO_FR
> +
> +/* Xilinx S3AN share MFR with Atmel SPI NOR */
> static const struct flash_info xilinx_parts[] = {
> /* Xilinx S3AN Internal Flash */
> { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
> @@ -38,6 +59,57 @@ static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
> return page | offset;
> }
>
> +/**
> + * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
> + * @nor: pointer to 'struct spi_nor'.
> + * @sr: pointer to a DMA-able buffer where the value of the
> + * Status Register will be written.
> + *
> + * Return: 0 on success, -errno otherwise.
> + */
> +static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
> +{
> + int ret;
> +
> + if (nor->spimem) {
> + struct spi_mem_op op =
> + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
> + SPI_MEM_OP_NO_ADDR,
> + SPI_MEM_OP_NO_DUMMY,
> + SPI_MEM_OP_DATA_IN(1, sr, 0));
> +
> + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
> +
> + ret = spi_mem_exec_op(nor->spimem, &op);
> + } else {
> + ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
> + 1);
> + }
> +
> + if (ret)
> + dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
> +
> + return ret;
> +}
> +
> +/**
> + * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
> + * the flash is ready for new commands.
> + * @nor: pointer to 'struct spi_nor'.
> + *
> + * Return: 1 if ready, 0 if not ready, -errno on errors.
> + */
> +static int spi_nor_xsr_ready(struct spi_nor *nor)
> +{
> + int ret;
> +
> + ret = spi_nor_xread_sr(nor, nor->bouncebuf);
> + if (ret)
> + return ret;
> +
> + return !!(nor->bouncebuf[0] & XSR_RDY);
> +}
> +
> static int xilinx_nor_setup(struct spi_nor *nor,
> const struct spi_nor_hwcaps *hwcaps)
> {
> @@ -83,6 +155,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
> static void xilinx_late_init(struct spi_nor *nor)
> {
> nor->params->setup = xilinx_nor_setup;
> + nor->params->ready = spi_nor_xsr_ready;
> }
>
> static const struct spi_nor_fixups xilinx_fixups = {
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index fc90fce26e33..b44b05a6f934 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -86,15 +86,6 @@
> #define SPINOR_OP_BP 0x02 /* Byte program */
> #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
>
> -/* Used for S3AN flashes only */
> -#define SPINOR_OP_XSE 0x50 /* Sector erase */
> -#define SPINOR_OP_XPP 0x82 /* Page program */
> -#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
> -
> -#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
> -#define XSR_RDY BIT(7) /* Ready */
> -
> -
> /* Used for Macronix and Winbond flashes. */
> #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
> #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
> --
> 2.30.2
>

Next message: zhangwensheng (E): "Re: [PATCH -next] block: update io_ticks when io hang"
Previous message: Alim Akhtar: "RE: [PATCH 01/10] ARM: dts: exynos: add missing HDMI supplies on SMDK5250"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]