Re: [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy

[Vinod Koul]

On 15-12-21, 16:02, Peter Geis wrote:
> Good Afternoon,
> 
> This is my series to support the usb2 phy devices on the rk356x.
> The rk356x phy has a single muxed interrupt and has moved the usb2phy
> nodes out of the grf and into their own nodes.
> The phy needs to tie back into the grf for register control, similar to
> the rv1108.
> By moving the phys into their own nodes, they now have full
> #address_cells = 2 register addresses, but they still reside below the 32bit
> mmio range.
> 
> This driver series only supports the host configuration for the rk356x.
> I have have tested it on the following:
> rk3566 - Pine64 Quartz64 Model A
> rk3399 - Pine64 Rockpro64
> 
> Please provide feedback and comments as you see fit.

Applied patches 2-6 to phy-next

Thanks

-- 
~Vinod