Re: [PATCH v8 1/8] PCI: brcmstb: Change brcm_phy_stop() to return void

From: Jim Quinlan
Date: Mon Nov 15 2021 - 19:09:07 EST


On Thu, Nov 11, 2021 at 4:57 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> On Wed, Nov 10, 2021 at 05:14:41PM -0500, Jim Quinlan wrote:
> > We do not use the result of this function so make it void.
>
> I don't get it. Can you expand on this?
>
> brcm_phy_cntl() can return -EIO, which means brcm_phy_stop() can
> return -EIO, which means brcm_pcie_suspend can return -EIO.
> brcm_pcie_suspend() is the dev_pm_ops.suspend() method.
>
> So are you saying we never use the result of dev_pm_ops.suspend()?
Hi Bjorn,

In this situation we are going into suspend. In doing so, any
problems with the brcm phy may be erased/forgiven upon resume, since
clocks are turned off and most power removed/reduced. An error from
brcm_phy_stop() that becomes the return value of brcm_pcie_suspend()
will bring a halt to the entire suspend IIRC. In fact, I forced a
-EIO in this code and it panic'd on suspend. This is not really the
behavior I want for what is most likely a recoverable error.

Perhaps a dev_err(...) will suffice while still returning 0?

I noticed that reset_control_rearm() also returns a value, and if that
is in error it will not be erease/forgiven by suspend sleep. I will
fix this.

Regards,
Jim Quinlan
Broadcom STB


>
> > Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
> > ---
> > drivers/pci/controller/pcie-brcmstb.c | 10 +++++-----
> > 1 file changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > index cc30215f5a43..ff7d0d291531 100644
> > --- a/drivers/pci/controller/pcie-brcmstb.c
> > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > @@ -1111,9 +1111,10 @@ static inline int brcm_phy_start(struct brcm_pcie *pcie)
> > return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
> > }
> >
> > -static inline int brcm_phy_stop(struct brcm_pcie *pcie)
> > +static inline void brcm_phy_stop(struct brcm_pcie *pcie)
> > {
> > - return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
> > + if (pcie->rescal)
> > + brcm_phy_cntl(pcie, 0);
> > }
> >
> > static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
> > @@ -1143,14 +1144,13 @@ static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
> > static int brcm_pcie_suspend(struct device *dev)
> > {
> > struct brcm_pcie *pcie = dev_get_drvdata(dev);
> > - int ret;
> >
> > brcm_pcie_turn_off(pcie);
> > - ret = brcm_phy_stop(pcie);
> > + brcm_phy_stop(pcie);
> > reset_control_rearm(pcie->rescal);
> > clk_disable_unprepare(pcie->clk);
> >
> > - return ret;
> > + return 0;
> > }
> >
> > static int brcm_pcie_resume(struct device *dev)
> > --
> > 2.17.1
> >