[PATCH v8 3/8] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

From: Jim Quinlan
Date: Wed Nov 10 2021 - 17:18:00 EST


Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
allows optional regulators to be attached and controlled by the PCIe RC
driver. That being said, this driver searches in the DT subnode (the EP
node, eg pci-ep@0,0) for the regulator property.

The use of a regulator property in the pcie EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at

https://github.com/devicetree-org/dt-schema/pull/63

Signed-off-by: Jim Quinlan <jim2101024@xxxxxxxxx>
---
.../bindings/pci/brcm,stb-pcie.yaml | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 508e5dce1282..ef2427320b7d 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -158,5 +158,28 @@ examples:
<0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
+
+ /* PCIe bridge */
+ pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ vpcie3v3-supply = <&vreg7>;
+ ranges;
+
+ /* PCIe endpoint */
+ pci-ep@0,0 {
+ assigned-addresses =
+ <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pci14e4,1688";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+ };
+ };
};
};
--
2.17.1