[net-next PATCH v2 10/15] net: dsa: qca8k: add explicit SGMII PLL enable

[Ansuel Smith]

Support enabling PLL on the SGMII CPU port. Some device require this
special configuration or no traffic is transmitted and the switch
doesn't work at all. A dedicated binding is added to the CPU node
port to apply the correct reg on mac config.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 drivers/net/dsa/qca8k.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 05ecec4ebc01..8917bb154e8f 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1237,6 +1237,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		break;
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_1000BASEX:
+		dp = dsa_to_port(ds, port);
+
 		/* Enable SGMII on the port */
 		qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
 
@@ -1255,8 +1257,11 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		if (ret)
 			return;
 
-		val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
-			QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD;
+		val |= QCA8K_SGMII_EN_SD;
+
+		if (of_property_read_bool(dp->dn, "qca,sgmii-enable-pll"))
+			val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+			       QCA8K_SGMII_EN_TX;
 
 		if (dsa_is_cpu_port(ds, port)) {
 			/* CPU port, we're talking to the CPU MAC, be a PHY */
-- 
2.32.0